627027
12
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
12
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED CHANG E S AND T YPI N G ERRORS RESERVED
8. mainTenance
Warning!
Turn the machine off and disconnect it from the mains before maintenance or repairs are performed!
Frequently blow out any dust that may accumulate inside the motor.
Apply a light coat of car wax to the table and column to keep the surfaces clean.
If the power cord is worn, damaged or cut, have it replaced immediately by a qualified electrician.
8.1 lUbricaTion
All ball bearings have been greased and do not require any further lubrication. Periodically lubricate the gea and
rack table elevation mechanism, the splines (grooves) in the spindle and the rack (teeth).
9. elecTrical sysTem
Figures 19 and 20
Check the tension of the machine and the power source before connecting. They should match.
Always shut down the machine after using it and remove the plug from the socket. Never pull the cable to
remove the plug, this will lead to damage to the cable with a possible shortcut as a result.
9.1 groUnding
In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to
reduce the risk of an electric shock. This machine is provided with a grounded cable and plug.
The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
Do not modify the plug if it will not fit in the outlet. Have the proper outlet installed by a qualified electrician.
Improper connection of the equipment grounding conductor can result in a risk of electric shock. The conductor
with insulation having an outer surface that is green with or without yellow stripe is the equipment grounding
conductor. If a repair or a replacement of the electric cord or plug is necessary, do not connect the equipment
grounding conductor to a live terminal.
Check with a qualified electrician if the grounding instructions are not completely understood, or in doubt as to
whether the tool is properly grounded.
Repair or replace damaged or worn cords immediately.
9.2 prodUcT specificaTions
Model HU16-2 Topline HU16-4 Topline
Motor power 0,38 kW 0,38 kW
Drilling capacity 16 mm 16 mm
Drilling depth 80 mm 80 mm
Spindle taper MT2 MT2
Number of speeds 12 12
Spindle speed range 280 - 3000 rpm 280 - 3000 rpm
Column diameter 70 mm 70 mm
Distance spindle-column 185 mm 185 mm
Base dimensions l x w 400 x 230 mm 400 x 230 mm
Packaging dimensions l x w x h 1390 x 600 x 260 mm 1390 x 600 x 260 mm
Net weight 60 kg 60 kg
Voltage 230 V 400 V
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Huvema HU 16-2 TOPLINE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Huvema HU 16-2 TOPLINE in de taal/talen: Engels als bijlage per email.

De handleiding is 4,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Huvema HU 16-2 TOPLINE

Huvema HU 16-2 TOPLINE Gebruiksaanwijzing - Nederlands - 16 pagina's

Huvema HU 16-2 TOPLINE Gebruiksaanwijzing - Deutsch - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info