627060
44
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
44
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
15
8.3 Taper calculations
The taper of the workpiece can be calculated by turning the tapered
workpiece. The sensor of the lever meter touches the workpiece at
location A. Press it to zero the lever meter.
Select the taper function.
Move the lever meter to position B on the workpiece
surface. Press it to zero the level meter.
Calculate.
The displayed value on the X-axis is the taper, the one
displayed on the Y-axis is the angle.
Close.
9. Service and maintenance
Disconnect from the mains!
Switch off the machine, disconnect from the power source and make sure that all
parts have come to a standstill before perfoming any service or maintenance.
Disconnect the digital readout from the power source before cleaning. It is recommended that the 
readout be cleaned with a lint-free cloth with a non corrosive, non abrasive cleaning uid. Make
sure that the uid can not reach or enter the connections.
Never use compressed air to clean the readout!
10. Troubleshooting
problem Possible cause Possible solution
1. Nothing happens
when the unit is
switched on
a. Unit not correctly
connected to the power
source
a. Connect the digital readout to the power source
b. Cable damaged or
defect
b. Check the power cable, replace if necessary
c. Wrong voltage c. Check that voltage of power source and digital
readout match
d. Shortcircuit in encoder d. Disconnect the encoder
2. Electrical shock
when touching the
house of the readout
a. Readout not grounded a. Ground the readout
b. Power drains off b. Check the feed
3. No data on axis a. No data a. Change both encoders. When data appears,
replace the encoder. If no data appears, replace
the digital readout
b. Special funtion chosen b. Leave the special function
4. Encoder does not
count
a. Encoder too short a. Replace with a longer encoder or shorten the
distance to be measured
b. Reader head defect b. Replace
c. Chips and dirt between
encoder and reader head
c. Remove chips and dirt
d. Distance too large
between encoder and
reader head
d. Shorten the distance
e. Cables of encoder bend
or damaged
e. Replace
f. Encoder broken f. Replace
60
°
AB
AB
0
90
80
70
60
50
40
30
20
10
30
20
70
50
40
60
10
90
80
0
8.5
4.907
A
B
Y
X
ALE
ALE
Y
X
ALE
ALE
Y
X
ALE
ALE
44

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Huvema-HU-1010-B-4-SINO

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Huvema HU 1010 B-4 SINO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Huvema HU 1010 B-4 SINO in de taal/talen: Engels als bijlage per email.

De handleiding is 7,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Huvema HU 1010 B-4 SINO

Huvema HU 1010 B-4 SINO Gebruiksaanwijzing - Nederlands - 48 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info