518170
60
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
60
Care of your Scandinavia 400
Trouble shooting
Always start by checking the needle
Always start with a new needle as soon
as you discover that a stitch is not what
you expected. Test sew on a scrap of
the fabric you are sewing. Check that
you have chosen the correct needle
and see that it is correctly inserted. See
page 14.
Unattractive stitches
The thread tension is not correct. See
page 12. Make sure that the thread is
not catching. Certain thread spools
are unsuitable for spooling from the
horizontal spool pin. Try instead with
the vertical spool pin.
The machine may be incorrectly
threaded. Be sure to place spool
holders correctly.
The correct threading is shown on
page 9.
Wrong bobbin thread. It should be of
the same thickness as the upper thread
except for embroidery.
The needle breaks
The needle can strike against stitch
plate and break. Change the needle.
See page 14.
The upper thread breaks
Check the thread spool to see that it
has not caught in any way.
The needle eye may have sharp edges
which cut the thread. If so, change the
needle. See page 14.
The upper thread is incorrectly
threaded. See page 9.
The upper thread may have too much
tension. Refer to page 12.
The hole in the stitch plate may be
chipped and have sharp edges. We
recommend that you replace it.
The bobbin thread breaks
The bobbin thread may be incorrectly
threaded. See page 12.
The stitch plate hole is damaged. See
"Upper thread breaks".
Irregular thread tension
This may be due to poor quality
thread. When sewing with cotton
thread, increase the thread tension. See
page 12.
Irregular bobbin winding
The machine is not correctly threaded
for bobbin winding. See page 11.
The fabric puckers
The upper thread tension is too tight.
See page 12 for correct thread tension.
Use the correct presser foot as
recommended by the Infodisplay.
The machine does not feed the
fabric
The stitch length is too short. Increase
stitch length.
The feed teeth may be lowered. Raise
them by turning the dial to
. See
page 14.
The feed teeth are full of dust and dirt.
Clean with the brush. See page 59.
The stitch is too loose - fabric layers
not held together
The thread tension is far too loose.
Page 12 shows how to adjust the
thread tension.
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Husqvarna SCANDINAVIA 400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Husqvarna SCANDINAVIA 400 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info