518150
33
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
31
Trouble Shooting
Trouble Shooting
Always Start by Checking the Needle
• Always start with a new needle as soon as you
discover that a stitch is not what you expec-
ted. Test sew on a scrap of the fabric you are
sewing. Check that you have chosen the correct
needle and see that it is correctly inserted. See
page 10.
Unattractive Stitches
• The thread tension is not correct. See page 9.
• Make sure that the thread is not catching. Cer-
tain thread spools are unsuitable for spooling
from the horizontal spool pin. Try instead with
the vertical spool pin.
• The machine may be incorrectly threaded. Be
sure to place spool holders correctly.
The correct threading is shown on page 7.
• Wrong bobbin thread. It should be of the same
thickness as the upper thread.
The Needle Breaks
• You may have helped the machine to feed by
pulling the fabric. The needle can strike against
stitch plate and break. Change the needle. See
page 10.
The Upper Thread Breaks
• Check the thread spool to see that it has not
caught in any way.
• The needle eye may have sharp edges which cut
the thread. If so, change the needle. See page
10.
• The upper thread is incorrectly threaded. See
page 7.
• The upper thread may have too much tension.
Refer to page 9.
The Thread is Knotted
• The hole in the stitch plate may be chipped and
have sharp edges. We recommend that you
replace it.
The Bobbin Thread Breaks
• The bobbin thread may be incorrectly threaded.
See page 8.
• The stitch plate hole is damaged. See ”Upper
thread breaks”.
Irregular Bobbin Winding
• This may be due to poor quality thread. When
sewing with cotton thread, increase the thread
tension.
• The machine is not correctly threaded for
bobbin winding. See page 7-8.
The Fabric Puckers
• The upper thread tension is too tight. See page 9
for correct thread tension.
The Machine Does Not Feed the Fabric
• The stitch length is too short. Increase stitch
length.
• The feed teeth may be lowered. Raise them by
turning the stitch length dial to the left.
• The feed teeth are full of dust and dirt. Clean
with the brush. See page 30.
The Seam is Too Loose – Fabric Layers
Not Held Together
• The thread tension is far too loose. Page 9
shows how to adjust the thread tension.
Machine Runs Sluggishly
• Dirt or lint has built up under the stitch plate.
Loosen the plate and brush clean between the
feed teeth and in the bottom area. See page 30.
• Dirt or lint has packed in the hook. Remove the
bobbin and clean with the brush. See page 30.
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Husqvarna Prelude 350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Husqvarna Prelude 350 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info