35210
35
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
35
TROUBLESHOOTING GUIDE
Problem Cause Correction
Upper thread
breaks
1.The machine is not threaded correctly
2.The thread tension is too tight
3.The thread is too thick for the needle
4.The needle is not inserted correctly
5.The thread is wound around the spool
holder pin
6.The needle is damaged
1. Rethread the machine
2. Reduce the thread tension (lower number)
3. Select a larger needle
4. Remove and reinsert the needle ( at side
towards the back)
5. Remove the spool and thread again
6. Replace the needle
Lower thread
breaks
1.The bobbin case is not inserted cor-
rectly
2.The bobbin case is threaded incorrectly
3.The lower thread tension is too tight
1. Remove and reinsert the bobbin case and
pull on the thread. The thread should pull
easily
2. Check both bobbin and bobbin case
3. Loosen lower thread tension as described
Skipped
stitches
1.The needle is not inserted correctly
2.The needle is damaged
3.The wrong size needle has been used
4.The foot is not attached correctly
1. Remove and reinsert needle ( at side
towards the back)
2. Insert a new needle
3. Choose a needle to suit the thread and
fabric
4. Check and attach correctly
Needle
breaks
1.The needle is damaged
2.The needle is not correctly inserted
3.Wrong needle size for the fabric
4.The wrong foot is attached
1. Insert a new needle
2. Insert the needle correctly ( at side to-
wards the back)
3. Choose a needle to suit the thread and
fabric
4. Select the correct foot
Loose
stitches
1.The machine is not correctly threaded
2.The bobbin case is not correctly
threaded
3.Needle/ fabric/ thread combination is
wrong
4.Thread tension wrong
1. Check the threading
2. Thread the bobbin case as illustrated
3. The needle size must suit the fabric and
thread
4. Correct the thread tension
Seams gather
or pucker
1.The needle is too thick for the fabric
2.The stitch length is wrongly adjusted
3.The thread tension is too tight
1. Select a ner needle
2. Shorten the stitch length
3. Loosen the thread tension
Uneven
stitches,
uneven feed
1.Poor quality thread
2.The bobbin case is wrongly threaded
3.Fabric has been pulled
1. Select a better quality thread
2. Remove bobbin case and rethread and
insert correctly
3. Do not pull on the fabric while sewing, let it
be fed by the feed dogs
The machine
is noisy
1.The machine must be lubricated
2.Fluff or oil have collected on the hook or
needle bar
3.Poor quality oil has been used
4.The needle is damaged
1. Lubricate as described
2. Clean the hook and feed dog as described
3. Only use good quality sewing machine oil
4. Replace the needle
The machine
jams
Thread is caught in the hook Remove the upper thread and bobbin case,
turn the handwheel backwards and forwards
by hand and remove the thread pieces.
Lubricate as described
Please note that on disposal, this product must be safely
recycled in accordance with relevant National legislation
relating to electrical/electronic products. If in doubt please
contact your retailer for guidance
35

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Huskystar-E20

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Huskystar E20 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Huskystar E20 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Huskystar E20

Huskystar E20 Gebruiksaanwijzing - Nederlands - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info