307697
21
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
- Instructions for installation and use
18
Settings
Press buttons and at the
same time for at least 4 seconds
to access the personalisation
menu, where you can choose
your language and the display
brightness.
The word “LANGUE”
(LANGUAGE) will appear; press
to display the language set. If
you want to change the language
set, just scroll along the
languages available by pressing
and confirm your selection by
pressing
.
To adjust the brightness of the
display, press both buttons
and at the same time for at
least 4 seconds: the word
“LANGUE” (LANGUAGE) will
come up; press
to display the
wording “LUMINOSITE ECRAN”
(DISPLAY BRIGHTNESS).
Press
to display the brightness
set; if you want to change it,
scroll along the three brightness
levels available with
and
select the desired one with
.
Special displays
After the first wash cycle..
The water hardness level is
displayed for 10 seconds, and you
can adjust the amount of
detergent you use accordingly:
Low
Medium
High
and subsequently:
No iron
Press to select the desired
function.
This option allows you to obtain
crease-free washing which is
easier to iron.
The appliance optimises the
washing conditions according to
the type of fabrics that are being
washed.
To select it, press
until the
word ON appears on the display.
In the Synthetics and
Delicates, programmes the
wash cycle is interrupted and the
washing is left to soak in water
before the appliance is drained.
To complete the cycle, press the
Start button.
The selection of this option is
indicated by symbol
appearing.
Note: this function is not
available with the Stain
Removal option.
Special programmes
Press to select the desired
function.
If you set this option, the
following options will be
displayed:
Special (OFF)
Rinse only
Spin cycle only
Drain
To select the desired "special
programme", press
, to
confirm your selection press
.
If you don't wish to select a
special programme, press
when the wording "Special"
(OFF) comes up on the display.
Class A at 40°C: Your has a special programme to obtain excellent wash results even at
low temperatures.
The results are the same as you would get with a 60°C wash, thanks to the washing machine's action and
to the increase in the duration of the wash.
To set this programme, place the mark situated on the knob completely to the left and set the temperature
to 40°C.
The wording "CLASS A" will appear on the display.
Daily: has a programme designed to wash lightly soiled garments in a short amount of
time.
You can wash different types of fabrics together (except for wool and silk), with a maximum load of 3 kg.
This programme allows you to save on both time and energy as it only lasts approximately 30 minutes.
WE RECOMMEND THE USE OF LIQUID DETERGENT.
To set this programme, turn the index situated on the knob to any position in the synthetics sector, select
a temperature of 30°C and select the Rapid option .
The wording "DAILY" will appear on the display.
Note: these programmes were designed to provide you with the best performance levels and therefore
cannot be modified; you may only reduce the spin cycle speed and delay the programme start.
Special wash programmes
the indication of the fabric
sector selected (COTTON,
COLOURS, SYNTHETICS,
DELICATES and WOOL)
the temperature corresponding
to the wash programme set
the recommended wash load:
after pressing Start, the
estimated duration of the cycle is
displayed; if you have set the
Delay timer
the countdown
to the wash programme start is
displayed.
During the wash cycle
The following are displayed:
the amount of time left
the temperature, during the
heating phase (on the scale on the
right-hand side of the display);
once heating is over and for the
entire duration of the cycle,
the weight of the load inside the
appliance:
the wash phases (pre-wash,
heating)
the options selected.
Door locked
Symbol on indicates that the
washing machine door is locked to
prevent it from being opened
accidentally. Wait for symbol
to
turn off before you open the
appliance door.
Error message
In the event of a fault, a message
is displayed, (e.g. F-01), which
should be communicated to the
Service Centre.
End of the programme
At the end of the programme, the
word END is displayed.
If you have used too large a dose
of detergent, symbol
lights
up.
This washing machine
nevertheless guarantees a perfect
rinse.
To look after your
garments, the appliance
may sometimes stop
with water in the tub,
leaving the wash to
soak.
Press to end the wash
cycle.
Demo Mode
The appliance is equipped with
a demo mode.
If the wording "DEMO MODE"
appears among the wording that
appears on the display, you
should disable it by following
these few simple steps:
- turn the appliance off at the
ON-OFF (C) button.
- keep Start/Reset (B) button
pressed and turn the appliance
back on at the same time.
From now on the demo mode is
no longer enabled.
HYDROSTOP
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hotpoint-Ariston ad 1600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hotpoint-Ariston ad 1600 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 5,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info