479262
7
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
EN
7
Signals for successive refilling:
Once, at the end of a cycle, the level of detergent/fabric
softener falls below the level required for a successive
wash cycle, the display will visualise the relative messages
At end of cycle refill detergent” or “At end of cycle refill
softener” or “At end of cycle refill tanks”. If the tanks are
not filled, the successive wash cycles in Auto Dose System
will be carried out without any intake of detergent.
! We suggest adding detergent and fabric softener ONLY
after the machine’s signal.
! NEVER mix two different detergents; always clean out
the tank before adding a new type of detergent (refer to
“Cleaning cycle set by the user”).
Using the “Auto Dose System”
If the compartments have been filled with detergent and
fabric softener, you may start using the machine (refer to
Running a wash cycle”).
Powder detergents for pre-washing and powder
additives may only be used in the traditional mode or
using the “Auto Dose System”, by placing the additives
directly inside the drum, preferably in conjunction with the
“laundry ball”.
Whenever bleaching is required, pour the bleach in the
relative compartment (refer to the option “Super Wash”).
Modifying pre-set parameters:
The machine automatically intakes detergent on the
basis of the selected programme, wash load and water
hardness. However, the amount of detergent/fabric
softener used may be modified.
button: press to increase, decrease and to exclude
detergent intake.
button: press to increase, decrease and to exclude
fabric softener intake.
The level of detergent/fabric softener suggested by the
machine is indicated by 3 bars.
Less than 3 bars indicates a lower level of detergent/
fabric softener compared to that suggested by the
machine, while more than 3 bars indicates a higher level of
detergent/fabric softener.
Cleaning the tanks:
Tank cleaning cycles can either be automatic or pre-set by
the user.
Automatic cleaning:
The washing machine carries out an automatic cleaning
cycle during the rinse cycle if the level of detergent that
remains is insufficient for carrying out a
successive wash cycle.
Cleaning cycle set by the user:
Run the cleaning cycle (with empty drum) if you require
adding a different product to the previous one or if the tanks
have been incorrectly filled (e.g. fabric softener has been
erroneously poured into the detergent tank or vice-versa).
Press button and hold for 5 sec. to activate cleaning of
the detergent tank, button for cleaning the fabric softener
tank or button for cleaning both tanks. Keep pressing for
a further 3 sec. (the countdown “4-3-2-1” will appear in the
top right corner) until “CLEAN-GO” pops up.
The cleaning cycle lasts about 40’ if the tanks are initially
empty; if not, the cycle will last longer. The icons indicating
that the tanks are empty will appear on the display.
“Traditional” mode
Pull out the detergent dispenser drawer up to the first stop
point (see picture) then pour the amount of detergent and
other additives (e.g. bleach) required for a single wash cycle
directly into the dispenser.
1. pre-wash compartment: use
powder detergent only.
2. main wash compartment:
use powder or liquid detergent.
If the latter is used, we
recommend pouring it into the
dispenser immediately before
starting the washing machine
and without running a pre-
wash cycle.
3. bleach compartment: to be used whenever bleaching is
required (refer to “Super Wash” option).
Tablet detergent or the relative “laundry ball” must be added
directly inside the drum. In this event, deactivate the “Auto
Dose System” (by pressing the button until the relative
vertical bars disappear from the display).
Do not pour any fabric softener as the appropriate quantity
required for each wash cycle will be automatically extracted.
To deactivate fabric softener intake, press the button until
the vertical bars disappear from the display.
For wool and silk garments, we recommend using a special
detergent which must be poured directly into the detergent
dispenser (compartment 2).
Running the wash cycle:
Select the programme and the compatible options on the
basis of the required need and type of load.
3
1
2
7
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hotpoint-Ariston AQUALTIS ADS93D 69 EU bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hotpoint-Ariston AQUALTIS ADS93D 69 EU in de taal/talen: Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 8,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info