538717
8
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
When the door is fitted, attention must be paid to •
potential hazards as defined in EN 12604 and
EN 12453.
Environmental conditions2.3
ATTENTION
Damage due to temperature differences
Differences in the inside and outside temperatures may
cause deflection of the door elements (bi-metal effect).
This may result in damage when the door is operated.
Comply with the operating conditions.
The door is intended for the following operating conditions:
Temperature:
Exterior side• -40°C to +60°C
Interior side• -20°C to +60°C
Relative humidity: 20% to 90%
Fitting3
WARNING
Danger of injury as the result of structural
modifications
Changing or removing functional parts may put important
safety components out of action. Uncontrolled door
travel could occur and persons or objects may be
trapped as a result.
Do not alter or remove any functional parts.
Do not attach any additional components. The
torsion springs are precisely matched to the door leaf
weight. Additional components may overload the
springs.
If equipping the door with an operator, pay attention
to the instructions provided by the manufacturers of
the door and operator. Only use the original
connections of the door manufacturer!
Before fitting the door, the door opening and the building
floor must be completely finished.
Observe the following during fitting:
Establish a secure connection with the building •
structure.
Check that the fixing materials supplied are suitable for •
the given structural conditions.
Do not fasten the door system to supporting structural •
members unless you have obtained the prior approval
of the structural engineer.
Ensure adequate water run-off in the area of the •
bottom seal and the frame parts, otherwise there is
danger of corrosion (see Technical Manual).
Ensure sufficient drying and ventilation in the building, •
otherwise there is danger of corrosion.
The door must be effectively protected before carrying •
out plastering and paintwork, as splashes of mortar,
cement, plaster, paint etc. can damage the door
surface.
Protect the door from caustic, aggressive substances, •
e.g. nitrous reactions from stones or mortar, acids,
alkali solutions, de-icing salt, aggressive paints or
sealants. Failure to do so could lead to corrosion.
To ensure simple and secure fitting, please follow
the work steps listed in the illustrated section.
Tensioning the springs3.1
WARNING
Danger of injury due to high torques
Springs are under high torque stress and may discharge
high forces if they are not secured during tensioning.
Fix the door leaf to prevent movement before
tensioning the springs.
The number of tensioning revolutions specified on the type
plate is an approximate value only.
When the springs are tensioned correctly, the moving door
leaf has a slight tendency to pull upwards.
Each time the door is serviced, the tension of the
springs should be checked and, if necessary,
subsequently re-adjusted.
Before putting the door into operation for the first
time, inspect the door according to the chapter
Inspection and Maintenance!
Operation4
Operating the door4.1
WARNING
Danger of injury during door travel
The sectional door closes to the bottom vertically;
persons or objects may be trapped.
When in operation, make sure that neither persons,
children in particular, nor objects are located within
the door's area of travel.
Always keep the opening area of the door clear.
Do not operate the door in strong winds.
The door must only be operated by suitably instructed
persons. If the sectional door is competently fitted and
inspected, it can be easily moved and operated.
Manually operated doors4.1.1
WARNING
Danger of injury due to improper operation
Persons or objects may be trapped if the door is
operated improperly.
Only open and close the door using the supplied
operating elements; these ensure a controlled,
smooth action.
When closing the door, make sure that the latches
engage fully and correctly.
Power-driven doors4.1.2
The automation of a sectional door requires that special
safety regulations be observed. Consult your supplier.
8
3 048 942 RE / 10.2012
ENGLISH
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hormann Sectionaal garagedeur serie 40 N bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hormann Sectionaal garagedeur serie 40 N in de taal/talen: Alle talen als bijlage per email.

De handleiding is 6,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info