478012
2
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
2 EN
SAFETY INSTRUCTIONS
All the parts of your machine are potentially hazardous if it is used
incorrectly or if it is not properly maintained. Special attention should
be paid to sections preceded by the following words.
Warns against a risk of serious bodily injury or fatal accident if
instructions are not complied with.
CAUTION:
Warns against a risk of bodily injury or equipment damage if
instructions are not complied with.
NOTE: Indicates a source of useful information.
This symbol warns you to be especially careful when
performing specific operations. See the safety
instructions on the following pages with reference to
the point or points indicated in the box.
TRAINING
A1. Carefully read the instructions in this manual. Before using your brushcutter,
familiarize yourself with how to use it correctly and with its controls. Make sure you
know how to stop the engine quickly.
A2. Use the brushcutter for its intended purpose, i.e.:
- Cutting grass with the nylon line attachment along flower beds, shrubberies,
walls, fences or lawns and to finish borders after mowing with a lawnmower.
- For cutting tall weeds and brush the 3-tooth blade.
- Using it for any other purpose could be dangerous or result in damage to the
machine.
A3. Do not allow children or anyone unfamiliar with the instructions to use the
brushcutter. Local legislation may stipulate operator age restrictions.
A4. Do not use the brushcutter in the following circumstances:
- When there are people, especially children, or pets nearby. Comply with the
safety perimeter of at least 15 metres between the machine and anyone who
may be in the vicinity. The brushcutter is to be operated by one person only.
- If you have taken any medicine or substance which may affect your reactions
and judgement.
- If a nylon line cutting head is used, make sure that the guard extension and the
line cutter blade are correctly in place in order to ensure correct line length.
- If safety devices such as the cutting attachment guard are missing or if the guard
is damaged.
A5. Do not make alterations to your brushcutter. By doing so, you could compromise
your safety and expose yourself to serious accident or injury.
A6. Remember that the owner or operator is responsible for any accidents or risks to
third parties and their property.
PREPARATION
B1. Do not use this equipment when barefoot or wearing sandals or when wearing
loose-fitting clothing that may become snagged on plants.Long trousers, boots or
protective footwear with anti-skid soles, goggles or a protective visor, gloves
(preferably leather) and ear defenders must be worn when operating the
machine.A hard hat should be worn in areas where falling objects may be
encountered (such as branches or stones).
B2. Make a thorough inspection of the area to be cleared and remove any objects
which could be thrown up by the machine (stones, pieces of wood, wire, bones,
etc.).
B3. WARNING: DANGER!
Petrol is extremely flammable.
Store fuel in specially designed containers.
- Refuel the machine outdoors only, with the engine switched off. Do not smoke
during refuelling or while handling fuel.
- Never remove the fuel filler cap or fill up the fuel tank when the engine is running
or while it is still hot.
- Do not start the engine in the presence of spilled fuel. Move the brushcutter
away from the area and avoid creating any source of ignition until the fuel has
evaporated and vapours have dispersed.
- Make sure that the caps are securely fitted on the fuel tank and on the fuel can.
B4. Replace faulty exhaust mufflers.
B5. Each time the machine is used, before starting, perform a general inspection and
check, in particular, all attachments, cutting assemblies, deflectors and mounting
bolts to make sure that they are not worn, damaged or loose. Always check that
the gas throttle trigger and the Stop button operate correctly.
B6. Check that the handles and harness attachment point are correctly positioned and
that the machine is properly balanced.
The correct positions and adjustments are specified in the section on "Preliminary
preparation and checks" in this manual.
B7. Adjust the idle speed so that the cutting attachment stops turning when the throttle
control is released.
B8. Install the blade cover on the blade type cutter during removal and installation
operations.
- Turn the engine switch to the Stop position and remove the spark plug cap.
- Wear gloves during this operation.
OPERATION
C1. Do not run the engine in a confined space where toxic carbon monoxide fumes
may accumulate.
C2. Work by daylight only.
C3. As far as possible, avoid using the machine on wet ground.
C4. When operating the machine, ensure compliance with the safety clearance of the
nylon line cutting head with respect to the harness attachment point.
C5. Walk when you use the machine, never run, and stay in a stable position. Beware
of obstacles such as stones and tree stumps which could trip you.
C6. Tread carefully on slopes. When working on slopes, always proceed crosswise:
never straight up and down.
C7. Do not use the machine on slopes that are too steep. It is the operator's
responsibility to assess the potential hazards of the terrain and to take every
necessary precaution for his or her own safety. This is especially important when
working on slopes or rough, slippery or loose ground.
C8. Never modify the engine settings in such a way that it runs at excessive speeds.
C9. Before starting the engine, make sure there is no-one within 15 metres of the
machine, that the cutting attachment is not touching the ground and that the
machine is in a stable position.
C10. Take care when starting the engine. Comply with the safety instructions and stay
clear of the cutting attachment.
C11. The engine must be stopped and the spark plug cap removed in the following
cases:
- Before performing any servicing action on the cutting system.
- Before cleaning, checking, adjusting or repairing the brushcutter.
- The only adjustments to be carried out with the engine running are carburettor
and idle speed adjustments.
- During this operation, make sure the cutting attachment does not strike any
object and that the machine is in a stable position.
- If the cutting attachment strikes an object, inspect the cutting system and the
transmission shaft to make sure they have not been damaged. Make any
necessary repairs before resuming work with the machine.
- If the brushcutter starts vibrating abnormally, look for the cause of the vibrations
immediately and take the necessary corrective action.
C12. Stop the engine in the following cases:
- Whenever the brushcutter is left unattended.
- Before refilling the fuel tank.
- When moving the machine from one area to another.
C13. Risk of "kickout" (blade thrust) with all rigid cutting blades.
C14. Using any attachments other than those recommended by Honda may cause
damage to your brushcutter, and such damage will not be covered by your
guarantee.
MAINTENANCE AND STORAGE
D1. Keep all nuts and bolts securely tightened to ensure safe operation. Regular
maintenance is required to ensure safety and optimal performance.
D2. Do not use the machine with damaged or worn parts. Parts must be replaced, not
repaired. Use genuine Honda parts. The cutting attachments must always be
marked with the manufacturer's brand, the reference and the maximum operating
speed. Parts of inferior quality may damage the machine and compromise
operator safety.
D3. Wear heavy gloves when removing and installing the cutting device.
D4. Never store the brushcutter with fuel in the fuel tank in a room where fuel vapour
could be ignited by a flame, a spark or a source of intense heat.
D5. Store in a clean dry room, out of the reach of children.
D6. Let the engine cool down before putting away the machine in any room.
D7. To reduce fire hazards, remove leaves, grass cuttings and excess oil from the
brushcutter, particularly from the cooling fins, the exhaust system and the fuel
storage area.
D8. When the machine is stored or carried, the cutting blade must always be covered
by its transport guard to avoid any accidental injury.
D9. If the fuel tank has to be drained, this operation must be performed outdoors when
the engine is cold.
D10. To protect the environment, do not dispose of old engine oil or fuel by pouring it
down the drain, in the gutter or on the ground.
Your local service station can have oil and fuel safely recycled.
SAFETY
2

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Honda-UMK425E

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Honda UMK425E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Honda UMK425E in de taal/talen: Engels als bijlage per email.

De handleiding is 1,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Honda UMK425E

Honda UMK425E Gebruiksaanwijzing - Nederlands - 88 pagina's

Honda UMK425E Gebruiksaanwijzing - Nederlands - 18 pagina's

Honda UMK425E Gebruiksaanwijzing - Deutsch - 88 pagina's

Honda UMK425E Gebruiksaanwijzing - Deutsch - 58 pagina's

Honda UMK425E Gebruiksaanwijzing - Deutsch - 18 pagina's

Honda UMK425E Gebruiksaanwijzing - English - 88 pagina's

Honda UMK425E Gebruiksaanwijzing - English - 58 pagina's

Honda UMK425E Gebruiksaanwijzing - Français - 88 pagina's

Honda UMK425E Gebruiksaanwijzing - Français - 58 pagina's

Honda UMK425E Gebruiksaanwijzing - Italiano, Espanõl - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info