477992
7
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
7 EN
1. Place the mower in an obstacle-free area.
2. The blade brake lever [1]
must be held firmly against the
handle for starting the engine.
All models:
3. Start the engine, allow it to reach
its maximum temperature and
rotation speed.
4. Select the suitable
forward speed thanks to the
shift lever [2].
5. Engage the blade:
press the yellow button [3]
located on the top of the blade
controllever [4], and at the
same time push it quickly and
hold it against the handle.
NOTE:
For self-propelled models and Rotostop models, it is
possible to refrain from using the forward drive while mowing in
areas with a narrow surface.
Likewise, the drive clutch can be used to move the mower without
engaging the blade clutch (lanes, borders, etc.).
CAUTION:
Move the blade control lever quickly from one end of its travel to
the other, so that the blade is always either fully engaged or fully
disengaged. This is to avoid stalling the engine and increases the
service life of the blade control mechanism.
Always release the blade clutch lever [4] and the drive clutch
lever [5] before starting the engine. Starting is more difficult
when the blade is engaged. If the clutch is engaged, the mower
will move when the engine is started.
Except PDE, PXE, RXE:
6. Engage mower forward drive when the engine has built up
speed: to start the mower moving, push the drive clutch lever [4]
forward and hold it against handle.
NOTE:
Move the drive clutch lever [5]
quickly and completely so that
the clutch is always fully
engaged or fully disengaged.
This avoids stalling the engine
and increases the service life of
the clutch mechanism.
The drive clutch lever [5] acts
as a variable speed control
according to its squezzed
position. It makes the speed
vary between zero and the
maximal speed preset with the
shift lever. The maximum
speed can be reached when
bothlevers [2] and [5] are
pushed forward completely.
The greater the height of the
grass to be cut, the more it is
necessary to reduce the drive
speed of the machine. This will
prevent overloading the engine
and improve the quality of the
cut.
7. To stop the mower moving, release the clutch lever [12].
8. To stop the blade rotating:
release the blade clutch
control lever [4].
release the flywheel brake
lever [1].
NOTE:
Releasing the blade
brake lever [1] stops the blade
rotating and stops the engine.
NOTE:
Mowing frequency: once a week
for a lawn intended for leisure
purposes, twice a week for an
ornamental lawn.
If possible, mow the lawn in the
afternoon or evening before
sprinkling, as the grass must be
dry. If dust levels are too high,
mow the lawn when the grass is
dry, but the ground is still damp.
Choose a cutting height adapted
to the terrain (see page 5).
For a regular cut, you should
overlap the part that has already
been cut by a few centimetres [6],
and increase this overlap zone if the cutting height is high.
To achieve maximum efficiency, follow the suggested path.
If your terrain does not have a regular shape or involves several
obstacles, divide it into internal parcels which you can mow in the
recommended direction.
[7] With collection: turn in a
clockwise direction to
achieve the maximum
efficiency.
[8] With the mulching kit
(optional, page 14): turn in
an anti-clockwise direction.
[1]
[2]
[3]
[4]
[5]
[5]
[2]
[4]
[1]
[6]
[7] [8]
7

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Honda-HRX426C

Zoeken resetten


  • Betreft hier een vraag over grasmaaier Honda HRX426COXO ,
    Wanneer men de opvangbak verwijderd ,word de opening met een klep om veiligheid afgesloten
    dit gebeurd met een veer bevestigd aan de klep, deze is om een of andere reden losgekomen en vind met de beste wil van de wereld juiste bevestiging wijze van de veer
    Betreft hier een vraag over grasmaaier Honda HRX426COXO
    NB bestaat er een mogelijkheid een foto van het probleem te verzenden
    Gesteld op 6-4-2024 om 18:42

    Reageer op deze vraag Misbruik melden
  • TREKKABEL HONDA GRASMASCHIEN BOUWJ 2008 HRX 426 CPDE Gesteld op 18-9-2023 om 11:02

    Reageer op deze vraag Misbruik melden
  • Hoe juist inklappen en op welke manier kan je het doen bij grasmaaiers Honda HRX 426? Gesteld op 2-5-2022 om 18:19

    Reageer op deze vraag Misbruik melden
  • bij het draaien van de motor ,gaat deze op en neer in toerental Gesteld op 28-2-2021 om 12:33

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Honda HRX426C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Honda HRX426C in de taal/talen: Engels als bijlage per email.

De handleiding is 5,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Honda HRX426C

Honda HRX426C Gebruiksaanwijzing - Nederlands - 20 pagina's

Honda HRX426C Gebruiksaanwijzing - Deutsch - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info