518476
3
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
54
GB
GB
ASSEMBLY AND INSTRUCTIONS FOR USE :
1. Unpack the product. Wipe off dust with a damp cloth.
2. Familiarize yourself with the pump. The pump speed is controlled by the dial located at the
front of the pump. The speed is indicated by a “min” and “max” (Fig 1). At its highest speed
level, the dial will cease to move any further. To decrease the pump speed, move the dial
counter-clockwise toward the “min”sign. Similarly, at its lowest speed, the dial will cease to
move any further.
3. Lead the cord through the cord slot on the bottom of the base.
This will ensure that the unit is balanced when placed on a flat surface. Attach the A/C
adaptor to the base power cord. DO NOT plug into outlet at this time (Fig. 2).
Figure 2Figure 1
TopTier
Stones
WaterSupply
Connector
Cut-Out
Stones
PVC
Tube
Pump
Watermark
Base
LED Light
Connector
Outlet
MiddleTier
Cut-Out
Platform
Adaptor
Switch
Base Power
Cord
Supporting
Poles
Base
Edge
LEDLight Cord
Figure 5
Figure 6
PUMP
Figure 3
Figure 4
Figure 7
Drip Loop
D
rawing on Base
Base Edge
Cut-Out
LEDLight Socket
TopTier
LED Light
Connector
Larger Hole
WaterSupplyConnector
Middle
Tier
Stones
Water
Watermark
4. Place the platform on the
supporting poles of the base
(Fig. 2).
5. Insert the PVC tube located under
middle tier into the pump (Fig. 2).
6. Insert the LED light cord through
the small hole located under the
middle tier (Fig. 2).
7. Align the cut-out at the bottom
edge of middle tier with the edge
of base so it sits flat on the base
(Fig. 3).
Note: Pump position should be
corresponding to the drawing on
base.
8. Insert the LED light connector into
the LED light socket on the
bottom of top tier, and then insert
the water supply connector on the
bottom of top tier into the larger
hole of middle tier (Fig. 4).
9. Add clean water into middle tier
(Approx. 300mls), and then into
base (Approx. 1l 67mls). The
water level should be even with
the watermark. Next, arrange the
stones provided on top tier,
middle tier and the platform as
desired (Fig. 5).
10.Plug the cord into 230V mains
outlet. The fountain is controlled
by the switch located on the
power cord. If pump doesn’t
operate, rotate in-line switch once
to turn “on” and once more to turn
“off”.
NOTE: Ensure that the electrical
cord loops below the electrical
outlet to form a ‘Drip Loop’ (Fig.
6). This will prevent water from
running down the cord into the
electrical outlet.
11.As this product has two flowing
directions, unplug the power
source before changing fountain
position. To do so, turn top tier
counter clockwise 90 degrees.
When water has stopped flowing
from it, switch the fountain back
on (Fig. 7).
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Homedics WFL-RVRB-2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Homedics WFL-RVRB-2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info