INSTRUCTIONS FOR USE:
1. Plug the unit into a 220-240 AC power supply. Press the POWER button to start the unit. A green indicator
light will be on. Press again to turn off. When the indicator turns red, the water tanks need refilling (Fig. 2).
2. Setting the TIMER:
a. Press the TIMER + or – button to set the running time for the unit.
b. Timer settings from 1–12 hours are possible.
c. 3 seconds after you stop pressing the TIMER button the LED screen will switch to display the humidity
indoors.
d. Pressing the MINUS (–) button until it reads 00 will turn the timer function off.
3. The UV FILTRATION indicator light is blue during operation. If the UV bulb fails, the UV FILTRATION indicator
light turns red and the UV bulb inside the unit should be replaced (Fig. 2). See Cleaning and Care section.
4. Press the WARM button to activate heated mist. The indicator in the WARM button will blink red. Press
again to turn the heat off (Fig. 2).
5. Press the NIGHT LIGHT ( ) button to turn on the night light around the Mist Setting control. Press again to
turn the night light off (Fig. 2).
6. To increase the mist output, turn the MIST ( ) control clockwise (to the right). To decrease mist
output, turn counter-clockwise (to the left).
ATTENTION: When the water in the water tank needs to be filled the red indicator light on the power button
will turn on and the power will shut off to indicate to the user to refill water.
6
GB
Digital Humidity
Readout LED
Displays current relative
humidity or timer setting.
Refill
Red indicator will
light when unit needs
to be refilled.
Power
Press to turn on—
green indicator
will light.
Warm Mist
When heat is activated the
indicator will blink red.
Adjustable Mist Control
Turn clockwise to
increase the mist. Turn
counter-clockwise to
reduce the mist.
Timer
When +/– buttons are
pressed the timer is
displayed for 3 seconds.
Fig.2
UV Filtration
Normally indicator is blue.
If UV bulb needs to be
replaced the indicator will
show red.
Night Light ON/OFF
will turn on and off
when button is
pressed.
LED Night Light
Ring illuminates when
Night Light Button is
pressed ON.
