30196
3
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
Set-up and installation of your new Ranger 2N
Please read the following section carefully before
attempting to install the Ranger 2N system
When installing the system in the model of your choice, please follow the
detailed instructions found in the model kit.
1. The transmitter requires eight and the receiver battery pack needs four
AA size batteries. These can be Alkaline or Ni-cad cells. If you choose to
install Ni-cad batteries, the optional CG-25A(110V)or CG-22(220V)
Hitec overnight wall charger can be used to re-charge them.
2. When loading the batteries, make sure the receiver and transmitter switches
are in the "off" position.
3. Open the battery door in the back of the transmitter by squeezing the tab on the
bottom of the battery door and lifting up.
4. Load batteries into the appropriate slots, taking care to install according to the
proper polarity.
5. Replace the battery door and turn the power "on". If the batteries are fresh and
charged, the green L.E.D. will be lit. Should the battery power drop to an unacceptable
level, the red L.E.D. will glow, warning the user of impending failure. At this point,
replace the alkaline cells or charge the batteries if they are Ni-cads.
1. Install the receiver to protect it from vibration and potential crash damage.
2. Typically one servo will be used for the steering and the other servo will be
used to operate a mechanical speed control, or not used at all and an optional
electronic speed control will be used.
3. If your vehicle is electric, there will be a proportional speed control you will wish
to use. If your speed control is mechanical, it will require a servo to operate it.
The battery and switch harness found in the kit must also be used to provide the
receiver with power.
4. Should your model use an electronic speed control that has the option of the
B.E.C. circuit (battery eliminator circuit), this feature will eliminate the receiver
battery and use the motor battery to feed the receiver and servos through the
speed control.
5. Please refer to the instructions that accompany your electronic
speed control for installation.
BATTERY INSTALLATION
RADIO SYSTEM INSTALLATION
4 5
PRESS BOTTOM AND
OPEN UPWARD
BATTERY COVER
8 AA SIZE BATTERY. BE
CAREFUL TO LOAD RIGHT
DIRECTION OF BATTERIES( + - )
(Electronic Speed Control)
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitec RANGER_IIN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitec RANGER_IIN in de taal/talen: Engels als bijlage per email.

De handleiding is 0,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info