30144
14
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
C) EPA (End Point Adjustment)
- After entering the Programming mode press the "FUNC" button to scroll to the EPA menu.
- The current settings will show on this menu.
- STEERING EPA
- "Steering" will appear first. Use the "DATA" + button to adjust the EPA setting higher or the - button to
adjust it lower. The factory setting is 100%. You can increase the end points up to 125% or down to 0%.
- Note: You have to adjust left and right separately; you must move the wheel in the
direction you wish to set.
- Tip: Always max out the dual rate dial to 125% before setting your
individual end points for maximum travel.
- Tip: The best way to set the EPA is to turn and hold the steering wheel to
the left end, then increase or decrease the EPA so the servo moves the car's wheels or
the boat's rudder to their maximum travel without binding. Repeat for the right side.
- THROTTLE EPA
- Press the "SEL" button to get to the throttle EPA.
- To adjust the high throttle setting, pull and hold the trigger back.
To adjust the Brake EPA push and hold the trigger forward.
- Note: The ATL switch on the handle under the D/R dial will make the
same adjustment as the Brake EPA.
- Tip: The ATL can be adjusted on the fly for fine tuning the braking power of the vehicle,
and the current setting is displayed on the operating screen.
- AUXILIARY EPA "SHIFT"
- Press the "SEL" button to get to the "AUX" Auxiliary 3rd Channel EPA.
- If "SHIFT" was selected for this model, you will need to push the shift button to set each side of the travel.
- AUXILIARY EPA "LINEAR"
- Press the "SEL" button to get to the Auxiliary 3rd Channel EPA.
- Note: If "LINEAR" was selected for this model, you will need to move the AUX digital trim tab
on the right side of the steering column to the side you wish to set. Leaving the trim centered
will adjust both sides at once.
- Press the "SEL" button to loop back to the main EPA menu.
- Note: The main EPA menu will now show all the new settings.
- Note: Push the "DATA"+&-buttons at the same time to reset to factory default.
- Press the "FUNC" button to scroll to the next menu, or press the "FUNC" button for
three seconds to return to the operation screen.
EPA
AUX
EPA
TH
ST
EPA
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitec AGGRESSOR_SRX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitec AGGRESSOR_SRX in de taal/talen: Engels als bijlage per email.

De handleiding is 1,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info