137586
16
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
16
EN
Tuning of broadcast channels not already preset in the
DVD/VCR can be performed in two ways.
AUTOMATIC TUNING
By “AUTOMATICALLY” tuning channels and placing
them in sequential order in the DVD/VCR’s memory i.e.
the first channel found will be memorised into the
DVD/VCR’s channel position 1, the second channel
found will be memorised into the DVD/VCR’s channel
position 2 and so on.
Execution of the “Automatic” tuning cancels all the pre-
set channels. DO NOT use this feature if you intend to
use some of the pre-tuned channels. Use the “Manual”
tuning function to tune in the additional channels you
require.
MANUAL TUNING
Each channel is tuned manually and individually. Follow
the steps laid out in the “Manual tuning” section.
Before you preset Channel ...
It is necessary to set the video channel if your
DVD/VCR is connected to the TV via the RF cable, and
TV channel 35 is employed for broadcasting, or inter-
ference lines appear on the picture. Please refer to
“Video Channel Setting”.
This DVD/VCR incorporates a 24-hour clock. The clock must
be set for the Automatic Timer Recording function to operate
correctly.
Your DVD/VCR is fitted with PDC (Refer to page 20). If the
PDC signal is available in your area, your DVD/VCR can get
the current time from your local PDC broadcast. It keeps
track of the time constantly referring to the time broadcasted
by your PDC broadcast. If you want to use this feature, refer
to “Auto Clock Setting” in the next section.
Use the remote control for this procedure.
Manual Clock Setting
Press MENU.
Press
K or L to select “INITIAL”,
then press
BB
.
Press
K or L to select “CLOCK”,
then press
BB
.
Press K or L to select “MANUAL”,
then press
BB
.
Press
K or L until the relevant year
appears, then press
BB
.
Likewise, set the relevant month,
day, hour, and minute.
Press MENU to start the clock.
7
6
5
4
3
2
1
VCR
Setting the Clock
PRESET FOR USE
MENU
TIMER
SET UP
INITIAL
INITIAL
CH TUNING
CLOCK
RF OUT
CLOCK
YEAR 2 0 0 4
MONTH 0 1
DAY 0 7 WE
HOUR
_ _
MINUTE
_ _
NOTES:
In the steps and , you can go back to the item
you want to correct by pressing
BB
.
Although seconds are not displayed, they begin count-
ing from 00 when you exit by pressing
MENU. Use this
feature to synchronise the clock with the correct time.
When unplugging the power-cord or if there is a power
failure for more than thirty seconds, you may have to
reset the clock.
Auto Clock Setting
Follow the steps through 1 to 3 in “Manual clock setting”.
Press
K or L to select “AUTO”, then press
BB
to select
“ON”.
Turn off the DVD/VCR once by pressing
yy
/I (Standby/
Power ON).
The clock will appear on the TV screen when you turn
on the DVD/VCR again.
NOTES:
Channel Presetting must be set before the Auto Clock
is set.
The DVD/VCR refers to the channel which was memo-
rised into position 01.
The PDC channel must therefore be set to position 01.
The clock cannot be set automatically if you are not
receiving a channel that carries a time signal in your
area. In this case, set the clock manually.
Once the auto clock setting is performed, the
DVD/VCR will correct the current time by receiving
PDC broadcasts whenever you turn off the DVD/VCR.
The DVD/VCR will correct the current time automatically
at 8:00, if the DVD/VCR’s power is turned off.
Between 23:00~1:00, the AUTO CLOCK function does
not work even if the DVD/VCR’s power is turned off.
3
2
1
65
TUNING
Automatic Tuning
Turn on the TV and select the TV channel to the video
channel on the TV.
Press MENU.
Press
K or L to select “INITIAL”,
then press
BB
.
Press K or L to select “CH TUN-
ING”, then press
BB
.
Press
K or L to select “AUTO”,
then press
BB
.
The tuner scans and memorises
all the active channels in your
area. After scanning, the tuner
stops on the lowest memorised
channel.
To Select a Desired Channel
You can select a desired channel by using
the PROG (K or L), or directly pressing the number but-
tons on the remote control.
Enter a channel numbers as a two-digit number for the
quickest results. For example, to select channel 6,
press 0 and 6. If you only press 6, channel 6 will be
selected after a brief delay.
•You can only select channels 1–99.
5
4
3
2
1
MENU
TIMER
SET UP
INITIAL
You can programme the tuner to scan only the channels that
you can receive in your area.
Use the remote control for this procedure.
VCR
INITIAL
CH TUNING
CLOCK
RF OUT
CH TUNING
AUTO
MANUAL
MOVE
H97H1BD(EN).qx4 04.10.27 5:11 PM Page 16
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi dvpf5e bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi dvpf5e in de taal/talen: Engels als bijlage per email.

De handleiding is 0,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info