137080
21
Verklein
Vergroot
Pagina terug
1/57
Pagina verder
English
21
EN
2C15
This DVD/VCR incorporates a 24-hour clock. The
clock must be set for the Automatic Timer Recording
function to operate correctly.
If your DVD/VCR is fitted out with PDC and the PDC
signal is available in your area, your DVD/VCR can
get the current time from your local PDC broadcast. It
keeps track of the time constantly referring to the time
broadcasted by your PDC broadcast. If you want to
use this feature, refer to AUTO CLOCK SETTING
in the next section.
MANUAL CLOCK SETTING
1 Press the MENU Button.
2
Press the B or C Button to select INITIAL,
then press the
gButton.
3
Press the B or C Button to select CLOCK,
then press the
g Button.
4
Press the B or C Button to select MANUAL.
5
Press the B or C Button until the relevant year
appears, then press the
g
Button.
VCR
SETTING THE CLOCK
6 Likewise, set the relevant month, day, hour,
and minute.
7 Press the MENU Button to start the clock.
Notes
In the steps 5 and 6, you can go back to the item you
want to correct by pressing the
h Button.
Although seconds are not displayed, they begin
counting from 00 when you exit by pressing MENU
Button. Use this feature to synchronise the clock
with the correct time.
When unplugging the power-cord or if there is a
power failure for more than one minute, you may
have to reset the clock.
AUTO CLOCK SETTING
1 Follow the steps through 1 to 3 in MANUAL
CLOCK SETTING.
2 Press the B or C Button to select AUTO.
3 Turn off the DVD/VCR once by pressing the
(Standby/Power ON) Button.
The clock will appear on the TV screen when you
turn on the DVD/VCR again.
Notes
Channel Presetting must be set before the Auto
Clock is set.
The DVD/VCR refers to the channel which was
memorised into position 01.
The PDC channel must therefore be set to position
01.
The clock cannot be set automatically if you are not
receiving a channel that carries a time signal in your
area. In this case, set the clock manually.
Once the auto clock setting is performed, the
DVD/VCR will correct the current time by receiv-
ing PDC broadcasts whenever you turn off the
DVD/VCR.
The DVD/VCR will correct the current time auto-
matically at 8:00.
Between 23:00~1:00, the AUTO CLOCK function
does not work even if the DVD/VCRs power is
turned off.
INITIAL
CH TUNING
CLOCK
RF OUT
CLOCK
YEAR 2 0 0 2
MONTH 0 1
DAY 0 1 TU
HOUR
_ _
MINUTE
_ _
TUNING
Tuning of broadcast channels not already preset in the
DVD/VCR can be performed in two ways.
AUTOMATIC TUNING
By AUTOMATICALLY tuning channels and
placing them in sequential order in the DVD/VCRs
memory i.e. the first channel found will be memo-
rised into the DVD/VCRs channel position 1, the
second channel found will be memorised into the
DVD/VCRs channel position 2 and so on.
Execution of the Automatic tuning cancels all the
preset channels. DO NOT use this feature if you
intend to use some of the pre-tuned channels. Use
the Manual tuning function to tune in the addi-
tional channels you require.
MENU
TIMER
SET UP
INITIAL
MANUAL TUNING
Each channel is tuned manually and individually.
Follow the steps laid out in the MANUAL TUN-
ING section.
Before you preset Channel ...
It is necessary to set the video channel if your
DVD/VCR is connected to the TV via the coaxial
cable, and TV channel 35 is employed for broadcast-
ing, or interference lines appear on the picture. Please
refer to Video Channel Setting.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi dv-pf2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi dv-pf2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info