565926
7
Verklein
Vergroot
Pagina terug
1/232
Pagina verder
7
GB
Read this cutter operator’s manual carefully. Be sure you understand how to
operate this cutter properly before you use it.
Establish a training program for cutter operators.
Use safety footwear, snug-fi tting clothing and protective gloves.
Wear eye, hearing and head protection devices. Use ballistics chaps or
pants when necessary. Clothing of fi re-resistant and unmeltable material
should be worn by emergency crews exposed to fl ames or high heat
conditions.
Use caution when handling fuel. Put the fuel tank caps back tightly on both
the fuel container and the cutter tank, move at least 3 m from the fuelling
point, and be sure there is no leakage of fuel from the fuel tank cap or the
fuel system before starting the engine. Avoid ignition from sparks.
DANGER
After refuelling, tighten fuel cap fi rmly and check for leakage. In
case of fuel leakage repair before starting operation since there is a
danger of fi re.
WARNING
Do not run the engine indoors, or where there is poor ventilation.
Engine fumes contain deadly poisonous carbon monoxide.
IMPORTANT
z Check before every use.
z After refuelling, make sure fuel does not leak or exude from around fuel
pipe, fuel grommet or fuel tank cap.
z In case of fuel leakage or exudation there is a danger of fi re. Stop using
the machine immediately and request your dealer to inspect or replace.
z It is not permitted to fi ll fuel above the shoulder level of fuel tank.
Operate this petrol engine cutter only in well-ventilated areas.
Do not store the unit with fuel in its tank, because a fuel leak could start a
re.
Do not cause sparks in any area where there are fl ammable materials.
Start the cutter on the ground with the cutting wheel completely in the clear.
Do not drop-start the cutter, or start it if the wheel is obstructed by the
ground or any other object.
Do not allow other persons to be nearer than 9 m when you are starting or
cutting with the cutter. Be aware that bystanders should wear hearing and
eye protection. Do not start cutting unless you have good footing and the
work area is clear.
Do not let someone hold the work you are cutting.
Adjust the wheel shield to a position where the sparks and debris from the
wheel will be thrown away from you. The wheel shield can be adjusted by
loosening the locking knob. After the position of the wheel shield is decided,
x the wheel shield by tightening the locking knob fi rmly. Do not operate if
the wheel shield is damaged, missing from the unit, improperly positioned, or
cannot be locked in proper position.
Operator Safety Precautions
3 m
Adjust Wheel Shield
Locking knob
CM14E_WE_all.indb 7CM14E_WE_all.indb 7 2008/02/05 21:09:302008/02/05 21:09:30
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi CM14E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi CM14E in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 9,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info