741523
5
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
5
EN
Intended use
This appliance is intended for professional use.
The appliance is designed only for grilling or
heating up dishes or sandwiches. Any other use
may lead to damage of the appliance or personal
injury.
Operating the appliance for any other purpose
shall be deemed a misuse of the device. The user
shall be solely liable for improper use of the de-
vice.
Grounding Installation
This appliance is classified as protective class I and
must be connected to a protective ground.
Grounding reduces the risk of electric shock by
providing an escape wire for the electric current.
This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug
must be plugged into an electrical outlet that is
properly installed and grounded.
Preparations before first use
Check to make sure the appliance is undamaged.
In case of any damage, contact your supplier im-
mediately and do NOT use the appliance.
• Remove all the packing material.
Clean the body, grid and crumb tray with luke-
warm water, a mild detergent and a soft cloth.
Don’t clean the heating elements.
• Level the appliance.
Make sure that a clearance of 15 to 20 cm is
maintained left and right of the appliance for ven-
tilation purposes.
Position the appliance in such a way that the plug
is accessible at all times.
ATTENTION! After cleaning the appliance must be
turned on for 30 minutes without anything in it. Any
smoke or odours produced during this procedure
are normal. Please ensure sufficient ventilation.
After the 30 minutes let the machine cool down and
rinse the grid in water and dry all parts. Don’t clean
the heating elements.
Preparations before wall mounting (Optional for item 264119 only)
Before installation: check the salamander and it’s
brackets for any damage. Note: mounting screws
and tools are not included
Important: make sure the appliance is mounted
within the reach of the electrical outlet.
Important: do not mount the salamander on dry-
wall or paneling without first anchoring to a wall
stud!
Important: Before starting mounting, make sure
you have all the tools, such as screw driver, elec-
tric drills, measuring tape, marking pencil (All
are not included).
The hinged distance is about 380mm between the
screws.
The salamander must be securely anchored on
a wall by attaching two of the brackets with 1/4”
bolts to the centre of an interior vertical wall stud
and the other two brackets to the wall using 1/4”
expanding toggle bolts. (not included)
Locating wall studs: anchoring the brackets on a
wall stud assures that your salamander will not
pry loose during operation. Wall studs are spaced
either 16 or 24 inches on center running floor to
ceiling as part of a wood structure’s framing. It is
recommended to use an electric stud finder (sold
separately) to locate wood (or steel) studs more
quickly and accurately for the location where you
want to mount the salamander. Note: be aware
that items such as ducts, electrical wires and
water pipes may be behind the walls in your work
area. Special care when installing fasteners.
For attaching the salamander securely to other
wall surfaces such as concrete or brick, see your
local hardware store for recommendations on
using the appropriate concrete and masonry fas-
teners and anchors for your particular structure.
After you have mounted the bolts, simply slide in
the salamander from the top onto the bolts.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hendi 264119 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hendi 264119 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 0,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info