742363
6
Verklein
Vergroot
Pagina terug
1/176
Pagina verder
6
EN
Installation inside your shop
We suggest you to install the blast chiller/freezer
inside an air-conditioned room. We kindly remind
you that without this facility, malfunction may occur
(for example condensation etc).
ATTENTION!
In order to allow a good functioning of the blast
chiller/freezer please draw attentions to the follow-
ing instructions.
Do not place the blast chiller to a direct exposure
of sunlight and to all the other means of irradia-
tion, such as high intensity incandescent lights,
cooking ovens, heating radiators.
Do not place the blast chiller close to external
exits into draught, such as doors, windows, air
vent or air conditioning fans.
Do not obstruct the blast chiller air inlet.
Do not place any kind of material on the blast
chiller. Keep clear the whole blast chiller perim-
eter in order to allow a proper air circulation.
Do no place the blast chiller into an high relative
humidity room (condensate water creation is
possible)
Do not place the blast chiller inside a closed cav-
ity. Without a proper air circulation the refrigera-
tion unit will not work effi ciently.
Do not place hot trays or pans on the top of the
blast chiller.
Verify that in the installation room there is enough
air turnover, even during closing and rest hours.
In this way the expansion/condensing unit will
work correctly.
Minimum wall distance
In order to allow a good blast chiller functioning and
a correct air circulation, during the positioning you
have to respect some minimum wall distance as
follows:
Keep a minimum distance, corresponding to the
door opening length, from the front unit grid
view.
Keep a minimum 10 cm distance of the blast
chiller back from the wall.
Blast chiller with built in condensing unit
The blast chiller is provided with built in condensing
unit, therefore it is necessary not to obstruct the
blast chiller air inlet corresponding to the front grid
for the air extraction in order to allow a proper air
circulation. Keep clear the whole blast chiller pe-
rimeter. We remind you that room temperature ris-
es or insufcient quantity of air to the unit condens-
er, reduce the blast chiller performances with
possible deterioration of the products and more
energy consumption. If the blast chiller with built in
condensing unit was leant on the side during trans-
portation we suggest you to keep the product in up-
right position for at least 8 hours, before switching
it on. In this way, you will allow the oil to flow in all
the components, lubricating them again. After-
wards you can proceed with the starting.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hendi 232187 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hendi 232187 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 20,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info