534542
6
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
Onyx
Operation
6
Ad-hoc Mode
If you have a Mac or PC computer, or other phone or tablet, use the following method
to connect to the system:
1. Put the Harman Kardon Onyx into Ad-hoc mode by touching
the Wi-Fi button for more than 5 seconds (ensure there
are no USB devices plugged into the USB port).
2. Go to the Wi-Fi Settings page on your Mac, PC or Phone and
connect to the network with the name HK_Onyx*****.
This may take around 40 seconds depending on your device.
3. Open your web browser and enter the IP address as
192.168.1.1 in the address bar of your browser.
The following page will be displayed.
4. Select the name of the Wi-Fi network you want to connect
from the drop-down menu Device Wireless SSID.
5. Enter the password for your network and click Connect.
A warning box will be displayed.
6. Ensure that you have entered the password correctly. If you are not sure,
click Cancel and enter the password again without any mistake.
The Harman Kardon Onyx will then attempt to connect to your Wi-Fi network. If the
connection is successful, the Wi-Fi LED will turn white and the connection successful
tone can be heard.
NOTE: To restore the factory default settings, long press Bluetooth and
Power button in Operational mode.
Operation
Switching ON and OFF
The power button on the top panel of the speaker allows you to set your speaker to any
of the following power modes:
Operational mode – White constant LED illumination
Sleep mode – Amber constant LED illumination
OFF mode – No illumination
To change the power mode:
Short press - Operational/Sleep mode: show battery status
Long press - OFF mode: wake up to Operational mode, Operational/Sleep
mode: enter OFF mode
Adjusting Volume
The volume buttons on the top panel allow you to increase or decrease volume. These
buttons are touch-sensitive, allowing volume control with a gentle finger-touch of the
buttons. Adjust volume using the Volume Up (“+”) and Volume Down (“–”) buttons
located on top of the unit.
Short press - Increase/decrease volume by 1 step
Press and hold - Increase/ decrease volume continuously (1 step per 0.2
second)
Playing Music through Bluetooth
1. Press the Power button. The LED will illuminate white.
The HK Onyx enters pairing mode the first time it is switched on.
2. If HK Onyx has been paired with any source before, touch
and hold the Bluetooth button for at least 4 seconds.
3. Perform a new device search on your Bluetooth-capable device.
4. Select HK Onyx BT on the device’s pairing list and enter pasword as 0000.
The device will be paired to HK Onyx automatically. If pairing is successful,
the Onyx’s Status LED will change to white.
5. Control playback from your Bluetooth-capable device.
6. You can change the name of the speaker for easy
identification using the H/ K Remote app.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Harman-Kardon-Onyx

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon Onyx bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon Onyx in de taal/talen: Engels als bijlage per email.

De handleiding is 0,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Harman Kardon Onyx

Harman Kardon Onyx Gebruiksaanwijzing - Nederlands - 10 pagina's

Harman Kardon Onyx Gebruiksaanwijzing - Deutsch - 10 pagina's

Harman Kardon Onyx Snelstart handleiding - English - 2 pagina's

Harman Kardon Onyx Gebruiksaanwijzing - Français - 10 pagina's

Harman Kardon Onyx Gebruiksaanwijzing - Italiano - 10 pagina's

Harman Kardon Onyx Gebruiksaanwijzing - Português - 10 pagina's

Harman Kardon Onyx Gebruiksaanwijzing - Espanõl - 10 pagina's

Harman Kardon Onyx Gebruiksaanwijzing - Dansk - 10 pagina's

Harman Kardon Onyx Gebruiksaanwijzing - Svenska - 10 pagina's

Harman Kardon Onyx Gebruiksaanwijzing - Suomi - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info