502638
55
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
CONFIGURING THE REMOTE 55
CONFIGURING THE REMOTE
any settings you had previously made will have to be
reentered.
To erase all settings and reset the remote to the
original factory default settings and displays, follow
these steps:
1. Press and hold the Program Button
O
for
about three seconds while the message shown
in Figure 21 appears in the remote’s LCD
Information Display
2
. Release the button
when the red light under the Set Button
q
appears.
2.
The remote’s MAIN MENU message (Figure 21),
will appear in the LCD display and the Set Button
q
will remain illuminated in red. Press the
/
¤
Navigation Button o until USER
RESET appears on the bottom line of the LCD
screen, as shown in Figure 79.
Figure 79
3. Press the Set Button
q
to reset the remote.
Note that once the Set button is pressed, the
process may not be stopped. While the remote’s
memory is being cleared, a RESETTING...
message will appear in the upper line of the
remote’s LCD screen as shown in Figure 80. It
may take a few minutes for the reset process
to take place, and the length of time will vary
depending on how much customization and pro-
gramming has taken place. Please be patient; as
long as the message appears in the display the
remote is functioning properly.
Figure 80
4. When the remote has been totally reset and
returned to the factory default condition, a
REMOTE RESET COMPLETE message will
appear (Figure 81) briefly, and then the remote
will return to normal operation.
Figure 81
Additional Notes on Configuring and Operating
the Remote
When the remote is being programmed, it will auto-
matically time-out if no button is pressed within a
thirty-second period. The message shown in Figure
82 will appear briefly, and the remote will then exit
the feature being programmed and any data entered
will be lost.
Figure 82
The programming or configuration process may
also be stopped at any time by pressing the Clear
Button
9
. The message shown in Figure 82
will appear, the data entered in the current process
will be lost and the remote will return to normal
operation. Any process that was underway when
the button will be pressed must be restarted.
• Extensive use of the programming, learning and
configuration functions of the remote may consume
significantly more battery power than normal remote
operation. While the batteries should last for four to
six months in normal operation, you may find that
they need to be changed sooner after the remote is
programmed for the first time.
When the batteries approach a level below which
the remote will not function, the remote’s LCD
screen will display a LOW BATTERY warning as
shown in Figure 83. We strongly recommend
replacing the batteries as soon as this message
appears to avoid the loss of programming and con-
figuration settings. These settings are
not
lost when
the batteries are changed quickly.
Figure 83
The remote has a built-in backlight that may be
activated by pressing the Light Button
P
. This
button is made from a special “glow” material so
that it is easier to find in dark rooms. This glow
feature does not consume any electricity, but the
glow will fade when the remote is kept in a dark
location for an extended period of time. The “glow”
feature may be restored by placing the remote in
normal room light for a few hours.
The remote’s backlight will remain lit for approxi-
mately five seconds after the Light Button
P
is
pressed, and it will stay lit for another five seconds
if any key is pressed while the backlight is on. You
may keep the backlight lit by holding the Light but-
ton, but extensive use of the backlight will reduce
battery life.
The LCD display will remain on for ten seconds
after a key is pressed and then turn off to conserve
battery life.
When any button is held for more than thirty
seconds, the LCD will turn off and the remote will
stop transmitting the codes to conserve battery life.
AVR
LOW BATTERY
TIME OUT OR
CLR KEY PRESSED
REMOTE RESET
COMPLETE
RESETTING...
MAIN MENU
USER RESET
AVR7300(120v)-OM 6/14/04 9:16 AM Page 55
55

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR7300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR7300 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info