INSTRUCTIONS
-J02997
5-15-2003
MULTI-POCKET WINDSHIELD BAG
General
These kits fit models equipped with H-D
®
KING Windshields
without handlebar-mounted gauges.
Kit number 58904-03 is a windshield bag accented with
Harley-Davidson script.
NOTE
A Service Manual for your model motorcycle is available
from any Harley Davidson Dealer.
Additional weight can affect motorcycle stability, handling
characteristics, and safe operating speed. Do not exceed 2.0
lbs. (.9Kg) maximum load. Evenly distribute weight between
each pouch. Improper loading can cause vehicle handling
problems leading to death or serious injury.
Installation
1. Remove the acorn nuts from the inside-center, left and
right on the horizontal windshield bracket.
2. Apply protective tape strips to the horizontal windshield
bracket to protect chrome finish.
2. Place windshield bag and bracket with eyelets over
screws in the horizontal windshield bracket. Mark the
location of the vertical supports for correct placement of
the rubber bumpers to protect the bottom of the bag
bracket. Place two bumpers each at the marked
locations of the vertical windshield supports.
3. Align the metal brace with the eyelets, to fit snugly onto
the windshield horizontal bracket screws.
4. Fasten the acorn nuts removed in step 1 onto the
screws through the eyelets under the windshield bag.
Torque the nut to 90–110 in-lbs (10.2–12.4 Nm).
NOTE
The brace under the bottom of the windshield bag conforms
to the contour of the windshield bracket as the acorn nuts
are torqued.
To keep this surface in the best condition, lightly wipe with a
Harley-Davidson Micro Fiber cloth, part number 94663-02,
using clear water or a mild Harley-Davidson cleaner such as:
• Sunwash (part number 94659-98),
• Bug Remover (part number 94657-98) or
• Harley Gloss (part number 94627-98).
NOTE
These cleaners are available separately or as part of the Harley
Care Starter Kit, part number 94671-99 from any Harley
Davidson Dealer.
1WARNING
Kit Numbers 58904-03
Figure 1. Bottom of Fairing Pouch
i01071a
Bracket
Bracket eyelets
Figure 2. Fairing Clip Attachment, Side View
i01072a
Pouch bracket
eyelet
Windshield
1
2
3
Item Description Part Number
1 Leather Pouch Not sold separately
2 Bumpers, rubber Not sold separately
3Protective tape Not sold separately
1 of 2
