495103
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Leslie Setup Procedure
1. Place your Leslie speaker in a location that produces the best
sound reproduction.
2. If you wish to connect your Leslie by means of the Leslie cable
provided, carefully plug the male end of the Leslie cable assembly
into the female socket located on your organ or keyboard. If you
are using a 6-pin cable assembly (Leslie models 122A & 147A),
make sure that all the pins on the plug align perfectly with those
on the female socket before plugging in the cable. If you are using
an 11-pin cable assembly (Leslie 122XB), make sure that the key
on the male plug aligns with the key on the female socket before
plugging in the cable. On Leslie 122XBs, you have the option of
connecting your organ or keyboard to your Leslie 122XB by
means of a cable with ¼” plug on both ends (not provided). Plug
one end of the cable assembly into the Line Output jack on your
organ or keyboard, and the other end to the Line Input jack on the
Leslie. Then proceed to step 4.
3. Repeat the above procedure to connect the other end of the Leslie
cable to the Leslie speaker.
4. On Leslie 122XBs, plug the AC power cord into a 120V AC outlet.
5. Turn the volume control (located on top of the power amplifier)
to the fully counterclockwise position.
6. If you are connecting a Hammond organ to your Leslie, pull all
the upper and lower drawbars including the pedal drawbar fully
out (#9 positions). Set the expression pedal to the loudest position
(fully depressed). For non-Hammond products, set the volume
control to the loudest position and set the voice registration to a
setting that provides maximum sound (i.e. Full organ).
7. Turn on the power switch on your organ or keyboard and on your
Leslie 122XB when using the 1/4” Line Input jack. For organs, play a three-note chord on the upper and
lower manuals and depress the low “C” pedal. For keyboards, place the unit in the split keyboard mode
and play a three-note chord on the upper manual and the low ”C” pedal note. Have someone slowly turn
the volume control clockwise on the Leslie until the sound begins to distort, then slowly decrease the
volume (turn the control counterclockwise) until the sound is undistorted. Your Volume Control is now
properly set.
Caution: Do not play your
Leslie at a volume setting that
produces a distorted sound.
Severe damage may occur to
your new Leslie if played in
this condition for an extended
period of time.
In most cases, your local Leslie dealer will connect your new Leslie speaker to your organ or keyboard
product. In the case that no setup was provided or if you wish at a later time to move your Leslie speaker to
another location, please carefully read and follow the setup procedure below:
Organ or Keyboard
female socket
Female end of
Leslie cable
Leslie male plug
Male end of
Leslie cable
6-pin connector cable
11-pin connector cable
male
female
www.hammondorganco.com
4
male
female
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hammond Leslie 122A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hammond Leslie 122A in de taal/talen: Engels als bijlage per email.

De handleiding is 12,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info