723758
8
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
5
7.Volume control
Turn the [STANDBY/VOLUME] rotary control (2) to the left/
right to decrease/increase the volume.
The playback volume level is visualised through the volume
status LED/light ring (3).
8.Ambient lighting
Note
In order to use the ambient lighting, the subwoofer
must be on. (See Section 5)
Move the [LED] switch (7) to the ON position to switch
on the ambient lighting (15).
Move the [LED] switch (7) to the OFF position to switch
off the ambient lighting (15).
9. Setting crossover frequency
Note
Set the frequency range in order to adjust the
subwoofer to the room acoustics or terminal devices
(for example, AV receiver).
The subwoofer then reproduces only the frequencies
of the selected frequency range. Frequencies outside
the range are ltered out.
Turn the frequency control (4) to set the subwoofer’s
frequency response (20–180 Hz, 20–240 Hz, 20–320 Hz
or 20–420 Hz).
10. Connection via Auxiliary Input
Youcan use the analogue audio input (AUX) to connect
mobile devices (for example, smartphone, tablet PC, MP3
player,etc.) as well as older analogue sources (CD/DVD
player etc.) to the subwoofer and play their audio signals
using the subwoofer.
Note
Switch off the subwoofer beforeconnecting a
terminal device.
Do not bend or crush the cable.
Connect your terminal device to the AUX socket (9) on
the subwoofer using a3.5-mm audio cable (jack cable).
Activate the Auxiliary Input mode by repeatedly pressing
[MODE] (5).
The Mode status LED (2) is lit green.
11. High Level input (HF IN)
The High Level input allows you to connect your existing
sound system to the subwoofer,inorder to expand a2.0
sound system into a2.1 sound system, for example.
Note
Switch off the subwoofer beforeconnecting aterminal
device.
Do not bend or crush the cable.
Connect your terminal device to the HF IN socket (11) on
the subwoofer using a3.5-mm RCAcable.
Activate the HF IN mode by repeatedly pressing [MODE]
(5).
The Mode status LED (2) is lit blue.
12. Low Level input (LF IN)
The LowLevel input allows you to connect an amplier
with subwoofer output to the subwoofer,for example.
Note
Switch off the subwoofer beforeconnecting aterminal
device.
Do not bend or crush the cable.
Connect your terminal device to the LF IN socket (12) on
the subwoofer using a3.5-mm RCAcable.
Activate the LF IN mode by repeatedly pressing [MODE]
(5).
The Mode status LED (2) is lit yellow.
13. Multiroom
The subwoofer can be integrated as aclient into an
UNDOK Multi-room group.
Moredetailed information can be found in the UNDOK
Guide.
14. Factory settings
To reset the subwoofer to the factory
default settings, proceed as
follows:
Press and hold the [RESET] button (6) for approximately 3
seconds.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hama SW01M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hama SW01M in de taal/talen: Engels als bijlage per email.

De handleiding is 0,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Hama SW01M

Hama SW01M Gebruiksaanwijzing - Deutsch - 10 pagina's

Hama SW01M Gebruiksaanwijzing - Français - 10 pagina's

Hama SW01M Snelstart handleiding - Alle talen - 102 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info