607799
2
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
2
Deutsch
Code scan Function
If programming using the direct codes failed to operate your TV, VCR or
Satellite then please use the automatic code scan which often finds compatible
codes from other brands or other models within your brand.
A. Switch on your TV SET. When scanning for a VCR code, switch on the
video recorder and start playing a videotape (i.e. start the play function on
the VCR).
B. Set the disk to position and press the key on your remote control
(for approx. 4 seconds) until the LED flashes twice.
C. Enter code 1 1 1 1 (i.e. press ). The LED flashes twice.
D. Press and hold the key until your TV SET is switched off. This
procedure might take up to 15 minutes (when searching for a VCR code,
press and hold the key and not the key).
E. If the device responds by going into standby or the VCR tape stops then
immediately remove your finger from the relevant key and immediately
press the key, this will store the found code into the remote and the LED
flashes twice.
F. When using the Automatic mode it is possible that the remote will find
several codes that appear to work although these might not give 100%
compatibility. If this happens then restart the Automatic mode and move
onto the next code. Please be patient as it might be necessary to scan
through many different codes until a suitable one is found.
Code scan for VCR or SAT
To complete a code scan for VCR or SAT, proceed as described for a TV code
scan. Set disk to position or respectively and complete the above
steps A to F.
At step D, press the key for SAT and the key for VCR.
Reading of currently set code
If you have programmed your remote control by means of a code scan, or if
you do not remember the code you have entered, you have the option to read
the currently used code.
A. Set the disk to position and press the key on your remote control
(for approx. 4 seconds) until the LED flashes twice.
B. Enter code 1 1 1 2 (i.e. press ). The LED flashes twice.
C. Press the key and count the number of LED flashes. This number
corresponds to the first digit of the code.
D. Press the key and count the number of LED flashes. This number
corresponds to the second digit of the code.
E. Press the key and count the number of LED flashes. This number
corresponds to the third digit of the code.
F. Press the key and count the number of LED flashes. This number
corresponds to the fourth digit of the code.
G. Steps C, D, E and F can be repeated as often as necessary.
To read the currently used VCR or SAT code, proceed as described above for
your TV SET. Set disk to position or respectively and complete the
above steps A to G.
Write down the code number as indicated by the LED.
SAT
VCR
OK
F
SAT
VCR
F
F
USER MANUAL
GB
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hama 20300 - Easytip Z1 Universal Zapper bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hama 20300 - Easytip Z1 Universal Zapper in de taal/talen: Engels als bijlage per email.

De handleiding is 0,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Hama 20300 - Easytip Z1 Universal Zapper

Hama 20300 - Easytip Z1 Universal Zapper Gebruiksaanwijzing - Deutsch - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info