9
- function buttons
lenaplortnoC
“Delay“ - End time delay (button b)
Touch it to light up related symbol and display present
programme end time. Accordingly to all programme settings
start of wash cycle will be delayed.
End time delay could be increased by turning programme
selector in steps of 30 minutes from 0,5-24h. For example,
display of “6:30“ means end of programme cycle will be in 6
hours and 30 minutes.
It is not applicable to programme “Spin/Drain“.
“Temp.“ (button d)
Touch it to adapt maximum of water temperature.
“
“Speed“ (button c)
Touch it to adapt speed of centrifugation.
“Wash“ (button e)
Touch it to adapt time for Washing.
“Rinse“ (button f)
Touch it to adapt times of rinse.
“Memo“ (button g)
IF you want to set new memory parameter, please touch
“Memo“button until display show “S” again, after new
parameter be set completly.
8
Control panel -
function buttons
“Smart Dosing “ (button a )
“Smart Dosing“ is default setting. Means, due to programme,
laundry load and water hardness there will be an optimal au-
tomatic dosage of liquid detergent and softener using related
compartments 1 and 3 of the detergent drawer. If activated
according symbols will light up.This function achieves optimal
results, saves washing agent and protect our environment.
A charge lasts for up to 20 programme cycles.
If a reservoir is empty related symbol will be blinking.
To get best results in each programme Haier has well defined specific default settings.
If there is no special requirement default settings are recommended.Accordingly to
these factory settings many programme parameters and additional functions could be
individually changed (see “programmes“ and “function“ buttons).
b
e f
a
“Intense“ (button h)
Intensifies cleaning results. Preferable if laundry is heavily soiled.
Press it intense function is activated.
“Child lock“ - control panel lock function
(button g + h)
This option blocks all panel elements against activation.After
starting,press simultaneously “Memo“+“Intense “ for
about 3 seconds. Panel lock symbol is now displayed. Next
repetition deblocks any function.
c
d
h
g
nothing
Memory functioon is available in parts of programmes,after
setting up the parameters for the program which have this
function,press“Memo”button till display show “S”,mean
memory saved success.
Before start the programmes,press Memo pusston when
displays show “P”,mean that choose the memo parameters,
then press start button running program.
