659876
4
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
4
Safety Instructions
The equipment should only be
used by trained operators.
The installation of the working
area has to correspond to the
relevant regulations. Set up
the unit in such a way, that the air slits
are not blocked and the extracted air
can escape well.
To avoid the risk of electrocu-
tion only connect the device to
the mains power supply.
If you pull the power plug it will
stop the connection to the
mains power supply. Set up
the unit so that the power plug is always
accessible. The power switch should
also always be easily accessible.
Only switch on the unit, if the
handpiece rests secured in the
handpiece holder, or if you
hold it safely in your hand.
Prevent any liquids from
entering into the control unit,
since this could damage the
electronic elements.
Clean the outside of the box only with a
damped cloth. Make sure, that you have
unplugged the unit before.
Only when pulling the mains
cable, you can ensure that the
device will be completely
disconnected from mains.
Check the mains cable regularly for
damages and in case of such, have it
be changed or repaired by an author-
ized service center.
Prevent your hair from
wrapping itself around moving
parts. If applicable, wear a
hair net.
When working with materials,
which might create dust or
moisture, use a drilling unit
with suction or spray tech-nique. Wear
a nose and mouth protec-tion. Always
follow the safety instruc-tions, provided
by the manufacturer of the materials
being formed and used.
For safety reasons you must
always wear disposable
gloves and protective glasses
when operating this unit. In addition, a
face mask conforming to EN 14683 type
IIR or EN 149 FFP 2 must also be worn.
Ensure that the patient’s foot
and the handpiece are held
firmly in place during the
operation. To prevend injury, work with
extreme caution on the foot of the
patient, and use only light pressure
To ensure that the bur/ tool
sits firmly in the chuck, do not
work with tools which:
have an oily shaft
are worn
are bent
Before using the equipment, assure
that:
the tool can be pushed far enough
into the chuck
(Test this with a dipstick and clean
if necessary)
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hadewe SB2 -12A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hadewe SB2 -12A in de taal/talen: Engels als bijlage per email.

De handleiding is 0,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info