478217
5
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
5
4: Finally, plug the transformer cable into the switch plug in
the transformer plug
The indication light should light up. Congratulations!
From now on, you are breathing cleaner air.
5: To switch the IonFlow 50F & 50F Style on and off:
Air purier ON (upper indication light on) & decorative light
OFF
Air purier ON (upper indication light on) & decorative light
ON
Air purier OFF (upper indication light off) & decorative
light OFF
6: The decorative lights can be changed easily.
4B. Assembly and installation of 50C
S E E P I C T U R E S O N PA G E 3 3
Assemble the air purier in the following order:
For ceiling installation: Drill an 8mm hole in the ceiling to
attach the wall plug and ceiling hook. Insert the plug into the
hole and screw in the ceiling hook.
For suspended ceilings: Consult an electrician for the most
appropriate solution
NB. Ensure that the distance from the wall to the air purier
is at least 3 feet / 1 metre
A-D: Thread the cable through the loops of the pressure
relief device.
E-F: Attach the pressure relief device to the top of the ion
generator (at the outlet on the plastic tube) and ensure that it
snaps into the holes
G: Connect the plug to socket on the ion generator
H: Attach the cable to the pressure relief hook. The air puri-
er should hang down at least 2 feet / 60 cm from the ceiling
I: Hang the pressure relief hook from the ceiling hook
J-K: Hold the metal hook on the ion generator. Then care-
fully lift the collector (aluminium cylinder) from underneath
(where the corona needles are) up and over the metal hook
L: Then let the collector slide back down and rest on the
metal hook. NB. This connection is vital in order for the air
purier to function.
• Finally, plug in the transformer plug at the wall socket. If
an extension lead is required, attach this to the transformer
cable.
The indication light should light up. Congratulations!
From now on, you are breathing cleaner air.
5. Cleaning and maintenance
Always unplug the transformer plug before cleaning the air
purier.
• Do NOT wash the collector in the dishwasher.
• Do not use cleaning products that contain alcohol solutions,
ammonia or alkaline substances, as these products may
damage the air purier.
• The collector should be cleaned around once a week or as
and when required. The collector may require more frequent
cleaning if used in highly contaminated environments.
Cleaning the collector:
IonFlow 50F & 50F Style: Remove the collector by lifting up
the ion generator with the collector attached. Then hold in
the metal hook and pull the collector downwards (pictures
1-3 on page 32, in reverse). NB. The ion generator may be
damaged if you pull it upwards!
IonFlow 50C: Hold in the metal hook on the ion generator
and move the collector down (pictures J-L on page 33, in
reverse)
1. Clean the collector with washing-up liquid, warm water
and a soft sponge/dish brush
2. Dry the collector with a dishtowel
3. Put the collector back on the ion generator according to
the earlier instructions.
If you have followed all the above instructions but the col-
lector is not clean, try the following:
1. Spray cleaning uid onto the collector and let it work for
5 minutes
2. Using a damp sponge, rub any remaining spots until they
disappear
3. Wipe the collector using a clean, damp sponge
4. Dry the collector with a towel and place it back on the ion
generator according to the earlier instructions.
5. Repeat the above procedure if necessary
Cleaning the ion generator, corona needles and acrylic
stand:
• Once every four months you may need to carefully clean
the fragile corona needles. Use a small brush (e.g. a
toothbrush) and carefully brush away the thin layer of white
lime scale and dirt which may have become attached to the
needles. Do not use pressure or water when you clean the
needles.
• Clean the ion generator and the acrylic stand with cleaning
spray and a damp cloth or sponge. Wipe clean and rub away
any remaining dirt. Dry with a towel. Do not allow the top and
bottom to come into contact with water and be careful with
the corona needles on the ion generator.
ENGLISH
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Habitat IONFLOW 50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Habitat IONFLOW 50 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 8,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info