622640
5
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
PROMIX400U2
V. 02 – 09/03/2012 5 ©Velleman nv
7
Headphones controls
PHONES: plug a headphone into this jack for audio monitoring.
LEVEL: adjust the output level of the headphones
MIXING: mixing adjustment knob. Turn to the left to hear channel(s) selected with CUE switches. Turn
to the right to hear master output. At the centre position, the levels for cue and master are even.
MONO SPLIT/STEREO: select the headphones input.
MONO SPLIT: the channels selected by the CUE buttons [6] are audible on the left side; the master
output is audible on the right side.
STEREO: the channels selected by the CUE buttons [6] are audible on both sides, in stereo.
8 Channel fader: set level of the channels with these sliders.
9 Master fader: master volume control
10
CROSS FADER ASSIGN A/B: select the channels A and B for the cross fader.
Note: channels that are not assigned to the cross fader are output without passing through the cross
fader.
11
Cross fader curve selector: select one of the cross fader start-up curves (abrupt or smooth
transition).
12
Cross fader: moving the slider from left to right will fade in channel B (louder) while fading out
channel A (more quiet). In the middle position, both channels are played at equal volume. Use the cross
fader assign buttons [10] to select channels A and B.
13 MASTER BALANCE: adjust the left-right balance of the master output
14 Effect controls: adjust the parameters of the effects.
15 EFFECTS: switch effects on or off.
16 DSP EFFECT/PARAMETER: effect parameter display
17 Effect selector: turn the knob to select a sound effect. Adjust the effect using the effect controls [14].
18 BOOTH MONITOR: adjust the level of the booth monitor
19 POWER SUPPLY INPUT: connect to 230VAC/50Hz power source
20 Balanced master outputs: audio output signal connectors (XLR, symmetrical)
21 Master RCA output: RCA connection to an auxiliary amplifier (not included)
22
BOOTH: RCA connection for booth monitor (not included)
REC: RCA connection to recording device (not included)
23 CH4 MIC: microphone input for channel 4
24 CH3 USB: USB input for channel 3
25
Input connectors (CH4-CH1): connect an external device (not incl., e.g. turntable, CD player…) to
these RCA (cinch) connectors.
26
SIGNAL GND (ground) connection: when buzzing occurs, connect to turntables to create earth
connection.
27 CONTROL A/B: CD player inputs
6. Cleaning and maintenance
All screws should be tightened and free of corrosion.
The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.
Moving mechanic parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
Disconnect the device from the mains prior to maintenance activities.
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
There are no user-serviceable parts.
Contact your dealer for spare parts if necessary.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw HQ Power PROMIX400U2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van HQ Power PROMIX400U2 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info