665719
4
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
4
MASTER 250-350-450
EN
DESCRIPTION
Thank you for choosing our product! To get the best of your equipment, please read carefully the following.
MASTER welders are traditional stick welders for welding in direct current (DC). They can weld rutile, cast-iron, basic
and stainless steel electrodes. They work on a 380V tri-phase power supply.
Before any use, read carefully the user manual and follow the instructions of the manufacturer. If
the item is misused, it can be dangerous for people, animals and buildings in the working environment.
The user remains responsible for the environment and working safety.
POWER SUPPLY – START UP
• These welders have to be plugged on a 3ph 380V socket (50-60Hz) with EARTH. The absorbed effective current (I1)
is shown on the machine, for maximal using conditions. The machine is tted with a bare power cable. The user has
to connect the three phases and the earth. Check if the power supply and its protection (fuse and/or circuit breaker)
are compatibles with the current necessary. The unit must be located in a place where it is easy to access to the plug.
• Start the machine by turning ON the ON/OFF button.
Connect the earth cable and the electrode holder in the quick plugs on the front of the machine. Respect the polarities
(+/-) indicated on the electrodes packaging.
Do not use the machine in a wet environment and in an area containing metallic conducting dust and inammable
elements.
USE
1. Ensure the earth clamp is connected to the work piece (as close as possible to the welding area)
2. Select the welding current by adjusting the knob according to the diameter of the electrode to weld. Adjust the
welding current by turning the knob form 1 to 7.
3. Thermal protection : After a long period of welding or intensive use, it is neFssary to wait until the machine cools
down. These machines are protected by a thermostat which will automatically cut out the power to the unit to prevent
damage during an overload.
4. After using the welding unit, turn off the unit switch and unplug the machine.
MAINTENANCE
• Refer all servicing to qualied personnel.
• Disconnect the generator and wait until the ventilator stopped before working on the unit. Inside the device,
voltages and current are dangerous.
• Two or three times a year, remove the steel cover and blow off the dust with compressed air. Let check the electrical
connections (with an insulated tool) and the insulations by qualied personnel.
• Regularly control the state of the supply cable. If this supply cable is damaged, it must be replaced by the
manufacturer, the after sales service or a qualied technician to avoid any danger.
ADVICE
• Respect welding polarities and currents indicated on the electrode packaging
• Remove the electrode from the electrode holder when you do not use it.
• Keep the ventilated parts of the machine clean to allow in/out air circulation.
SECURITE
The arc welding can be dangerous and leads serious injury, may fatal. Protect yourself and protect the others.
Respect the following warnings:
Arc rays Protect yourself thanks to a welding helmet in compliance with EN175 equipped with
lters in compliance with EN 169 or EN 379. Inform and protect by the same means any
people in the welding environment.
Rain, steam, humidity The working environment must be clean (degree of pollution ≤ 3) and protected against
rain. Put the appliance on an even place and at least at one meter from the parts to be
welded. Do not use in rain or snow.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gys MASTER 450 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gys MASTER 450 in de taal/talen: Engels, Frans, Italiaans als bijlage per email.

De handleiding is 0,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info