625814
5
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
5
Thank you for choosing the Gyspack OBD this is a high quality product and in order to get the maximum from it,
we advise you to read the instruction manual carefully prior to use. Please retain the manual for future reference.
General description
The GYSPACK OBD is designed to maintain the internal memory of your vehicle during a change of battery or any
other operation involving the disconnection of the battery. This unit prevents any loss of data or the need to
reprogram the on board system (Clock, radio, alarm, hands-free kit…) which can be a long process. Equipped with a
cigarette lighter plug, the GYSPACK OBD is also a 12V DC power supply for Laptops, TVs, tools, etc…
Easy to carry - this product has a compartment to store cables and charger.
To get the maximum from your machine and ensure the long life of the internal battery, it is recommended
the unit is charged after each use.
Test of the internal battery
To start the GYSPACK OBD and test the internal battery health, press the button for 3 seconds. The LEDs will light
and one of these three LED will stay on showing the battery status.
The red light indicates the internal battery is at less than 50% charge,
It is necessary to charge the internal battery immediately.
The yellow light indicates the internal battery is charged to between 50 and 75%
You can use the product but it is preferable to charge it as soon as possible.
The green light indicates the internal battery is fully charged.
The unit is ready to use.
To stop the unit press again the button for 3 seconds. If it doesn’t turn off manually, the unit stops after 4 hours.
Recharge of internal battery
To charge the internal battery, the GYSPACK OBD must not be connected to a vehicle.
1- Plug the charger of the unit into the mains supply (230V)
2- Plug the charger into the indicated place on the front of the machine
3- State of charge:
The red light indicates the internal battery is charging.
The green light indicates the internal battery is charged.
You can use the unit.
The yellow light indicates the internal battery is faulty.
It is necessary to replace the internal battery.
Attention:
If after 24 hours of charge the red light is still on, the internal battery is damaged. It is necessary to replace it.
Do not try to charge the product via the cigarette lighter connection of your vehicle. The current is not stable
and can damage the product or the c
igarette lighter connection. For optimum charge you must use the
charger delivered with the unit and plug it into the mains supply.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Gys-GYSPACK-OBD

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gys GYSPACK OBD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gys GYSPACK OBD in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info