625723
5
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
5
DESCRIPTION OF THE CHARGER (FIG I, PAGE 2)
The chargers CT 160 and CT 210 are designed to charge lead acid batteries with liquid electrolyte,
nominal voltage from 12V, and with capacity according to the table II, page 2.
1 – Ammeter 5 – Fuse
2 – Battery voltage selector 6 – cables + clamps
3 – Battery capacity selector 7 – handle (CT 210 only)
4 – Main switch 8 – Power supply (CT160 : fixed / CT210 : removable)
CHARGER MODE
Preliminary precautions
For indoor use, with good ventilation. Protect the charger from rain and moisture.
Remove the battery caps if there is, and check the level of liquid. If it is not correct, filled up with
distilled water. Clean well the battery terminals.
Check if the battery capacity and voltage are compatible with your charger. Do not charge the
battery when it is connected on the vehicle
Connection and disconnection
Connect the clamps (+ red, - black) to + and - battery terminals, making sure you get a good electric
contact, respecting the following order:
Connect first the battery terminal not connected to the chassis of the vehicle.
Then connect the other connection to the chassis remote from the battery and any fuel line.
At last, plug in your charger to 230 V 50/60 Hz mains supply.
Choose the charge voltage (12 / 24V) and the charge speed (normal or boost). The « Boost »
function allows charging a battery quickly.
Control and end of the charge process
These are traditional chargers; the charge process must be stopped manually.
The ammeter is a charge indicator. When the current drops down to 0, the battery charge is ending.
You can stop the charge process. In normal mode, it takes about 10 hrs to fully charge a battery. If
the ammeter is not at the minimum after this period, check the charge mode and voltage or have the
battery checked by a professional.
Do not let the charger connected more than 24 Hours on a battery.
After charging, disconnect the battery charger from main supply. Then remove the chassis connection
and the battery connection, in this order.
PROTECTIONS
Your product has been developed with a maximum of protections.
The clamps of the battery are isolated.
The polarity reversal will not cause danger. The protection is insured by an automotive fuse, which
must be changed in case of polarity error. Respect the rating of the fuse, which is indicated on the
charger.
This device is protected by an internal fuse to avoid any risk in case of damage to the charger.
(CT160 : 1,6A – CT210 : 2A)
Thermal protection: the transformer of the product is protected by a thermal switch. If the charger is
used intensively, it may switch in thermal protection mode (cooling time about 15min), and then
resume the charge.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gys CT160 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gys CT160 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info