625810
6
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
6
OPERATION
300W MODEL:
1) Choose desired connection:
Directly onto battery: powers any device up to 300W.
Cigarette lighter: powers any device up to 150W.
2) Connection:
Connect the red clip to the red "+" terminal of the converter and the black clip to the black "-" terminal of the converter; screw
clips in place.
Caution: reversing the polarity may damage the converter.
3) Connect the converter:
Wire: Connect the black clamp to the negative "-" terminal of the battery and then connect the red clamp to the positive "+"
terminal of the battery
Caution: If the clamps are not connected securely there is a risk of low/no power, cable overheating, damage to the inverter
supply, or fire.
Cigarette lighter: Connect the cigarette lighter plug into the socket.
4) Switch the inverter ON (the green LED illuminates) and connect your equipment to the converter. (230V or USB 5V)
5) After use, unplug your equipment and then switch OFF the Convergys and disconnect it from the cigarette lighter or the
battery.
TROUBLESHOOTING
SYMPTOM
CAUSES
REMEDIES
No voltage output Bad connection Check the cigarette lighter plug and cable connections
Weak battery Check the vehicle battery
Start the engine of the vehicle if necessary
Thermal overload
Stop the device. Leave the inverter to cool ensuring
adequate ventilation.
Fuse failure (in the inverter or
vehicle)
Check and replace fuse
The device turns ON and OFF intermittently
The direct load is too high. Reduce the load
The inverter turns OFF when a connected
device is switched ON
The starting current is too high.
Check if the maximum power of the inverter is suitable for
the required power of the device
Warning Buzzer sounds
Input current below the required
level (10.2-10.8V)
The unit will start again when the battery voltage reaches
the operating level of the inverter.
Red LED illuminates
The Convergys doesn’t supply any voltage
Input current is below the
protection level (9.2-9.8V)
Input voltage exceeds the
protection level (15-16V)
The unit will start again when the battery voltage drops to
the operating level of the inverter.
Excessive load, the protection is
activated.
Reduce the charge to the power level of the converter
Warning Buzzer sounds + red LED
illuminates
The Convergys doesn’t supply any voltage
The temperature is too high. The inverter will start again as soon as it has cooled down.
NB: The USB socket should continue to operate.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gys CONVERGYS 300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gys CONVERGYS 300 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info