157243
16
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
Programming Tracks
Programming tracks of a loaded CD is possible in the
stop mode of the CD. The display will indicate the
total tracks stored in the program. Up to 40 tracks
can be stored in the memory in any order. When 40
tracks are stored and you attempt to store another
track, the display will show “PROGRAM FULL”.
1 Load the desired discs in the disc trays.
2 Press PROGRAM to start programming.
The
PROGRAM flag flashes on the display.
3 Press the desired disc button to select the disc.
4 Press S or T to select the desired track.
5 Press PROGRAM to store the track.
Repeat steps 3 to 5 to store other discs and
tracks.
6 Press 9 once to end programming mode.
The total number of tracks programmed and
total playing time appear on the display.
Playing the program
1 Press B (or PLAY 2 on the remote control) to
start program playback.
–“PROGRAM PLAY” appears on the display.
The track number and elapsed playing time of
the current track will appear on the display.
2 Press 9 (or STOP 9 on the remote control) to
stop program playback.
Note : If you press any of the 3 CD Direct PLAY buttons,
the set will play the selected disc, the stored program
will be ignored temporary. The program flag will also
temporarily disappear from the display and then re-
appear when the playback for the selected disc ends.
Reviewing the program
Reviewing of program is only possible in the stop
mode.
Press S or T repeatedly to review the
programmed tracks.
CD CHANGER
32
M27 page 32
GB
PRESET TUNING
TIMER
PLAY
MODE
SIDE
SET CLOCK
TIMER SET
BAND
DUBBING
CD TAPE
RDS
MODE
TIMER
DBB
AMPM
SHUFFLE
FMMW
LWSW
STEREO
NR
BACK
RECORD
HSD
SHUFFLE
PROGRAM
1
2
3
FRONT
PROGRAM
RECORD
CLEAR
DUBBING
CD TAPE
PLAY
MODE
SIDE
PRESET TUNING
SHUFFLE
TIMER
SET CLOCK
TIMER SET
BAND
RECORD
PROGRAM
CLEAR
RDS
MODE
TIMER
DBB
PROGRAM
AMPM
SHUFFLE
FMMW
LWSW
STEREO
NR
BACK
HSD
FRONT
1
2
3
RECORD
PRESET TUNING
SHUFFLE
TIMER
SET CLOCK
TIMER SET
BAND
RECORD
PROGRAM
CLEAR
RDS
MODE
1
2
3
TIMER
DBB
PROGRAM
AMPM
SHUFFLE
FMMW
LWSW
STEREO
NR
BACK
RECORD
HSD
FRONT
PLAY
MODE
SIDE
DUBBING
CD TAPE
CLEAR
RECORD
PRESET TUNING
TIMER
PLAY
MODE
SIDE
SET CLOCK
TIMER SET
BAND
DUBBING
CD TAPE
RDS
MODE
TIMER
DBB
AMPM
SHUFFLE
FMMW
LWSW
STEREO
NR
BACK
RECORD
HSD
SHUFFLE
PROGRAM
1
2
3
FRONT
PROGRAM
Erasing the program (in the stop position)
Press CLEAR.
–“PROGRAM CLEARED” appears on the display.
Note : The program is also erased when the set is
disconnected from the power supply. If the CD
carousel is opened, the tracks belonging to the
outer two trays will be erased and “CLEARED” will
scroll on the display once.
CD Synchro Start Recording
During CD synchro start recording,
It is not advisable to fast forward/rewind your
cassette in TAPE DECK 1.
It is not possible to listen to another sound source.
1 Press CD to select CD.
2 Load a disc into the disc tray.
3 You can program the tracks in the order you
want them to be recorded (see Programming
Tracks). If not, the tracks are recorded
according to the selected disc.
4 Press TAPE 1/2 to select TAPE DECK 2.
5 Load a blank cassette (full spool to the left) into
TAPE DECK 2.
6 Press SIDE to select the front side of the tape.
The
FRONT flag appears in the display.
7 Press PLAY MODE to select the play mode ( å
or ) for TAPE DECK 2.
8 Press CD 2 TAPE to start recording.
The
RECORD flag flashes on the display.
The CD starts playing after a seven-second
delay to prevent recording on the leader tape
at the beginning of the tape.
9 Press 9 to stop recording.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grundig m 27 c bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grundig m 27 c in de taal/talen: Engels als bijlage per email.

De handleiding is 1,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info