569638
5
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
Connecting the unit
The unit is designed to operate from a mains
supply of 230 V, 50/60 Hz
i
.
When the set is connected for the first time or after
a power failure (without standby batteries fitted), the
display flashes to indicate that the clock and, if
necessary, the alarm time(s) should be set.
Standby-batteries – mains failure
If the standby batteries are fitted, the clock will
continue to operate during mains failure and the
preset stations are kept in the memory.
However, the display will not be illuminated and the
alarm will not sound unless the mains supply is restored
within 90 minutes of the preset alarm time (if so, the
radio will switch on or the alarm tone will sound).
Insert two 1.5 V alkaline batteries (IEC R03, size
AAA, UM-4 or equivalent) into the battery
compartment on the base of the set.
Insert the batteries only after the unit has been
connected to the mains in order to prevent unneces
-
sary drain. We recommend that the batteries are
replaced approximately once a year.
If the clock radio is to be disconnected for a long
period, the standby batteries should be removed,
otherwise they may discharge too quickly and
may leak.
Note:
The unit remains connected to the mains even
when it is switched off. The unit is only fully
isolated from the mains if the mains plug is
removed from the wall socket.
Note on Environmental Protection
Do not throw exhausted batteries in the
household refuse.
Hand over the old batteries to your
dealer or public collecting points when
buying new ones.
Important note for users in the U.K.:
When fitting a mains plug, follow the
instructions on page 2.
RDS / RESET POWER SUPPLY
11
SC 610 page 11
GB
RDS Features
v
The Radio Data System (RDS) is an information
system transmitted in addition to the VHF (FM) radio
programme
Your Sonoclock 610 offers the following features:
Station Name
The station name or an abbreviation is shown in
the display instead of the tuned frequency
(Example: BAYERN 3).
Traffic Information
Indicates which RDS stations provide traffic
information.
EON (Enhanced Other Network)
If your broadcasting station is using EON, you will
also hear traffic flashes of other programmes, when
the Traffic Information function is enabled.
Clock Auto Adjustment
Automatic time setting and synchronizing the clock
(if enabled).
Reset button
If, due to external interferences (caused by static
charges of carpets, thunderstorms, etc.), the
control electronics of your Sonoclock 610 should
receive bad information signals, or if no entries
at all are possible, press the RESET button.
For pushing this button, it is best to use a bent-up
paper clip.
This resets the unit to its initial state. The stored
data for the individual station memory positions,
the clock settings and the Last Station Memory
are cleared.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grundig Sonoclock 610 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grundig Sonoclock 610 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Grundig Sonoclock 610

Grundig Sonoclock 610 Gebruiksaanwijzing - Deutsch - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info