673601
11
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
11ENGLISH
Lime removing feature
(Self-Clean)
It minimizes the lime particles accumulated in the
steam reservoir of your iron.
Use the self-clean feature once in every 2 to 3
weeks. If the water in your region is very hard (if
lime particles fall down from the soleplate of the
appliance), we recommend to use the self-clean
function more frequently.
1 Unplug your iron.
2 Fill in the water tank up to MAX level.
3 Push the steam adjustment knob to the
position.
4 Plug in the appliance to a grounded wall socket
and set the temperature setting dial to MAX.
5 Unplug the iron when the thermostat warning
light
J
turns off.
6 Hold the iron over the sink, press and hold the
self clean button
C
and gently shake the iron.
During this process, the water in the water tank
comes down into the steam generation reservoir
quickly and is released through the soleplate
holes along with the lime particles (if any).
7 When the entire amount of water is discharged
from the tank, release the self clean button
C
. If
the iron still contains impurities, repeat this pro-
cess.
8 After the lime removal process is completed;
plug in the iron and make sure that the iron
soleplate is heated. When the iron reaches
to the adjusted ironing temperature, unplug
the appliance and gently iron on an old cloth.
Keep ironing until the water and lime stains left
on the soleplate are removed. Wait until the
iron cools down before storing it.
Caution
7
Do not add vinegar etc. and other lime remov-
ing substances into the water tank.
Lime protection system
(Anti-Calc)
The lime protection system in the water tank of
your iron prevents clogging of the steam holes.
Lime protection system is always active and there
is no need to replace it.
Automatic shutdown
The 3-way safety shutdown switches off the ap-
pliance automatically if the iron is left on the sole-
plate or on its side for 30 seconds, or is left in
the vertical position for 8 minutes without being
moved.
- The thermostat warning light
J
flashes to
show that the iron is switched off automati-
cally.
1 To reheat the iron, lift it up and move it gently.
The thermostat warning light
J
turns off.
2 When the temperature of the soleplate falls
under the set iron temperature, the thermostat
warning light
J
illuminates.
3 If the thermostat warning light
J
is illuminated
after moving the iron, wait until it turns off again
before starting to iron.
Note
7
If the thermostat warning light
J
is not illumi-
nated after moving the iron, the soleplate is
still at the required temperature and the iron is
ready to use.
OPERATION ______________________________
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grundig SI 7450 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grundig SI 7450 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Grundig SI 7450

Grundig SI 7450 Gebruiksaanwijzing - Nederlands - 15 pagina's

Grundig SI 7450 Gebruiksaanwijzing - Deutsch - 15 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info