20
Mains operation
Note:
Check that the mains voltage on the type plate (on the bottom of the
device) corresponds to your local mains supply. If this is not the case,
contact your specialist dealer.
1 Insert the mains cable supply (in the battery compartment) in the
»AC
~
« socket of the radio recorder.
2 Insert the power cord plug in the socket.
Caution:
The only way to disconnect the device from the mains supply is to pull
out the plug.
Battery operation
1 Open the battery compartment by pressing the marked section and
remove the lid.
2 Insert six batteries (6 x 1.5 V/Typ AM1/LR20/D-size), observing the
polarity marked on the base of the battery compartment.
Note:
Remove the batteries when they are flat or when you know that the devi-
ce will not be used for a long period of time. No liability is accepted for
damage resulting from leaking batteries.
The batteries are switched off during mains operation.
Environmental note:
Batteries, including those which contain no heavy metal, may not be dis-
posed of with household waste. Please dispose of used batteries in an
environmentally sound manner. Find out about the legal regulations
which apply in your area.
Inserting back-up batteries
During mains operation, the back-up batteries ensure that stored settings are
not lost in the case of a power failure or when the device is briefly dis-
connected from the mains.
1 Open the battery compartment by pressing the lid and sliding it to the
left.
2 When inserting the batteries (2 x 1.5 V/AM3/LR6/AA size) in the small
compartment, observe the polarity marked on the compartment base.
POWER SUPPLY
___________________________________