759534
89
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
86
External interface
Via the external interface the Bluetooth® adapter can be
rebooted or resetted. It is adapted as a break contact, which
can be used with conventional nc (normally closed) type
switches or push buttons.
1. Turn the entire system free of voltage.
2. Remove Bypass (C), see fold-out page I.
3. Connect switch or push button with cable 47 868 000
(special accessorie) to the external interface
(max. 16.4 ft [5m]).
4. Supply the entire system with voltage.
If the external interface is not used, the bridging contact
must remain plugged in!
Pairing
Pairing means the first coupling between two Bluetooth®
devices. This requires a proper executed installation. For an
already active Bluetooth® connection between a terminal
device and the Bluetooth® adapter no pairing is possible.
1. Activate Bluetooth® on device.
2. Select xxx Grohe SPA from Bluetooth® list.
xxxx is the 4-digit number (PIN number) which will be
displayed.
3. Enter PIN number and confirm.
4. Connection will established automatically.
5. The LED (A) on the adapter flashes 1x blue for a short time
when connection is quite correct.
The PIN number is unique for each adapter and is additionally
documented with a sticker on the backside. These are the last
four digits of the serial number. The PIN number can not be
changed!
When successfully paired, the PIN is no longer required when
a new connection attempt. When connected and activated the
App LED on the adapter lights up blue continuously. A
maximum of 8 devices can be paired. When logging a 9th
device the most rarely used one will be deleted from the list.
XXXX
Operation of the reset button (A) and Visualization by status LED (B)
Functions
Function Visualization
Operation takes place LED lights permanently blue
Reboot of the adapter LED lights up red for 3 sec.
Reset of the adapter LED lights up red, off, red, blue, red
Ready for operation LED off
Modul is supplied with voltage LED lights up red for 1 sec.
Permanent press of button, or
bridging contact removed
LED flashes red
Function Describtion
Changing the device Device will be logged out (connection closed/inactive).
After 10sec. the new device can be logged in.
Prioritization of connections It will be ensured that the operation can take place only with a single device
at any time.
Visibility of the Bluetooth® adapter The Bluetooth® adapter is always visible.
Reboot the Bluetooth® adapter
(Entire system turns off)
Press the button shortly (less than 3 sec.):
- Connection will be interrupted
- Bluetooth® adapter reboots
- System shuts down (Music, light (max. 60sec. delay), steam)
Reset of the Bluetooth® adapter
(Entire system turns off)
Press and hold the button (between 10 and 20sec.):
- Connection will be interrupted
- Pairing list will be cleared
- Bluetooth® adapter reboots
- System shuts down (Music, light (max. 60sec. delay), steam)
Data transfer As soon as a device is connected, the system can be operated using the
Grohe App.
Audio stream As soon as a device is connected, an audio stream can be sent to the
system by the Grohe App.
A
B
C
89

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grohe 36371 F-DIGITAL DELUXE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grohe 36371 F-DIGITAL DELUXE in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info