708284
4
Verklein
Vergroot
Pagina terug
1/147
Pagina verder
English
4
balance at all times. Proper footing and balance
enables better control of the tool in unexpected
situations.
k. Do not use on a ladder or unstable support.
Stable footing on a solid surface enables better
control of the tool in unexpected situations.
l. This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall net be made by children
without supervision.
4. TOOL USE AND CARE
a. Do not exceed the pressure rating of any
component in the system.
b. Protect material lines and air lines from damage
or puncture. Keep hose and power cord away from
sharp objects, chemical spills, oil, solvents,
and wet oors.
c. Check hoses for weak or worn condition before
each use, making certain all connections are
secure. Do not use if defect is found.
d. Purchase a new hose or notify an authorized
service center for examination or repair.
e. Release all pressures within the system slowly.
Dust and debris may be harmful.
f. Store idle tools out of the reach of children and
other untrained persons. Tools are dangerous in
the hands of untrained users.
g. Maintain tools with care. Follow maintenance
instructions. Properly maintained tools are easier
to control.
h. Check for misalignment or binding of moving
parts, breakage of parts, and any other condition
that may affect the operation of the tool. If damaged,
have the tool serviced before using.
i. Many accidents are caused by poorly maintained tools.
j. Never point any tool toward yourself or others.
k. Keep the exterior of the air compressor dry, clean,
and free from oil and grease. Always use a
clean cloth when cleaning. Never use brake uids,
gasoline, petroleum-based products, or any strong
solvents to clean the unit. Following this rule will
reduce the risk of deterioration of the enclosure plastic.
5. SERVICE
a. Tool service must be performed only by qualied
repair personnel. Service or maintenance
performed by unqualied personnel may result in a
risk of injury.
b. Disconnect power supply, open drain valve to
decompress tank and allow water to drain, and
allow air compressor to become cool to the touch
before servicing. Turn pressure regulator knob
fully counterclockwise after shutting off compressor.
c. When servicing, use only identical replacement
parts. Follow instructions in the Maintenance section
of this manual. Use of unauthorized parts or failure to
follow Maintenance instructions may create a risk
of injury.
SPECIAL SAFETY RULES
1. Know your air compressor. Read operation manual
carefully. Learn its applications and limitations, as well
as the specic potential hazards related to this tool.
Following this rule will reduce the risk of electric shock,
re, or serious injury.
2. Drain tank of moisture after use each day. If unit will
not be used for a while, it is best to leave drain valve
open until such time as it is to be used. This will allow
moisture to completely drain out and help prevent
corrosion on the inside of tank.
3. Risk of re or explosion. Do not spray ammable
liquids in a conned area. Spray area must be well
ventilated. Do not smoke while spraying or spray
where spark or ame is present. Keep compressors
as far from the spraying area as possible, at least
4.6 m from the spraying area and all explosive vapors.
4. Risk of bursting. Do not adjust regulator to result
in output pressure greater than marked maximum
pressure of attachment and/or the item being inated.
Never use at pressure greater than 8 bar.
5. Use an air pressure gauge periodically while
inating an item to check the air pressure.
6. The machine shall be connected to a circuit
protection device (fuse or circuit breaker). The
protection device shall be set at 10 A current, and
the user shall do necessary test according to clause
18.2.2 of EN 60204-1:2006 to check if the protection
device is suitable for use.
7. To reduce the risk of electric shock, do not expose
the machine to rain (water) or dust; store it indoors.
8. Inspect tank yearly for rust, pin holes, or other
imperfections that could cause it to become
unsafe. Never weld or drill holes in the air tank.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Greenworks G24AC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Greenworks G24AC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Fins als bijlage per email.

De handleiding is 14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info