644682
18
Verklein
Vergroot
Pagina terug
1/214
Pagina verder
EN
FR DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
English (Original instructions)
speCifiCations
Model 2200607
Voltage 80 volts
No load speed 3400 (±10%) SPM
Blade speed 3400 (±10%) SPM
Blade length 26" (66cm)
Cutting capacity 33mm
Measuered sound
pressure level
83 dB (A)
Guaranteed sound power
level
96 dB (A)
Vibration level Ah: 3.5m/s
2
, k:1.5m/s
2
Weight with battery pack 5.5kg
DesCription
1. Blade cover
2. Blade
3. Guard
4. Micro Switch
5. Front handle
6. Rotate release
7. Trigger Switch
8. On/off power button
9. Anti-jamming button
operation
For complete charging instructions, refer to the Operator’s
Manuals for your battery pack and charger models.
note: To avoid serious personal injury, always remove he
battery pack and keep hands clear of the lock-out button
when carrying or transporting the tool.
install BatterY paCK
Place the battery pack in the hedge trimmer. Align
raised rib on battery pack with groove in hedge
trimmer. See figure 2.
Make sure the latch on the battery pack snaps in place
and that battery pack is secured in hedge trimmer
before beginning operation.
reMove BatterY paCK
Locate the latch on the battery pack and depress to
release the battery pack from the hedge trimmer. See
Figure 2.
Remove battery pack from the hedge trimmer.
Caution
When placing battery pack in your hedge trimmer,
be sure raised rib on battery pack aligns with groove
in hedge trimmer and latch snaps in place properly.
Improper assembly of battery pack can cause damage
to internal components.
startinG tHe HeDGe triMMer See figure 3
Remove the blade cover.
Push he power button (I/O) to turn the unit on.
For added safety, there is a micro switch (4) in the front
handle. When operating, hold the trimmer with both
hands, one hand to squeeze the micro switch, and he
o her hand to squeeze the trigger switch (7).
stoppinG tHe HeDGe triMMer
Release the micro switch and trigger to stop the hedge
trimmer.
Press the power button to turn off the hedge trimmer.
Remove battery pack from the hedge trimmer.
usinG tHe rotatinG rear HanDle See figure 4.
Place the hedge trimmer on a flat and even surface.
Make sure that you released the trigger.
Pull the rotation lever (6) and begin turning the rear
handle. Release the rota ion lever and turn the handle
90 degrees to either side until it clicks into place and
the lever locks in.
To turn the handle back to center, pull the rotation lever
again, turn the handle slightly, release the rotation lever
and continue turning he handle until it locks into place.
anti-JaMMinG funCtion
If the branch is blocked in the blade, press the anti-
jamming button on the control panel, the blade will reverse
twice, and the branch should be released.
operatinG tips
Do not force the hedge trimmer through heavy
shrubbery. This can cause the blades to bind and slow
down. If the blades slow down, reduce the pace.
Do not try to cut stems or twigs that are larger than 15
15
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Greenworks 2200607 - 80V Pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Greenworks 2200607 - 80V Pro in de taal/talen: Alle talen als bijlage per email.

De handleiding is 23,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info