7.2 – PRELIMINARY CHECK UP
All preliminary checks must be performed at the first ignition or after a long
period of inactivity.
.
Check that the positioning of the appliance respects the safety distances.
Check that there are no flammable materials near the appliance.
For safety distances see Paragraph 4.2.
In case of an ignition after a long period of inactivity, all parts of the brazier,
the glass must have previously been inspected and cleaned of ash and dust.
Check that there are no flammable materials inside the combustion chamber
(documentation,cables,paper etc.)
8-START
After unpacking the appliance,prepare all accessories nearby.
Before starting the ignition phase it is advisable to carry out preliminary checks:
➢ Check that the positioning of the appliance respects the safety distances.
➢ Check that the appliance has no obstructions on the top near the smoke outlet
➢ Check that the appliance is positioned flat,stable and prefectly vertical
Ignition Signal:
When we use an Lighter Cube, it usually burns for 7-8 minutes.
The flame state is generally as shown in the picture above. Put on the glass tube.
(NOTE:The burning time of 1 kg of wood pellets is approximately 1.5 hours. It is not
recommended to use the fire hose continuously for more than 3 hours.)
