482106
22
Verklein
Vergroot
Pagina terug
1/45
Pagina verder
76-504-0914 21
WARNING: On first starting, the monitor has a time count of 7 minutes. It is important to
leave the unit connected to the mains but in the OFF condition for the duration of the
count.
Room Sensor Fault (E1)
The red led, buzzer and remote alarm relay are activated; the label Err will flash on the
display alternating with the alarm code E1. Possible causes are:
- faulty room sensor
- badly connected room sensor
Defrost Sensor Fault (E2)
The red led, buzzer and remote alarm relay are activated; the label Err will flash on the
display alternating with the room temperature. ; the alarm code E2 is displayed in the
alarm menu as indicated above.Possible causes are:
- faulty defrost sensor
- badly connected defrost sensor
Condenser Sensor Fault (E4)
The red led, buzzer and remote alarm relay are activated; the label Err will flash on the
display alternating with the room temperature. ; the alarm code E4 is displayed in the
alarm menu as indicated above.
Possible causes are:
- faulty condenser sensor
- badly connected condenser sensor
Condenser Temperature Alarm (H4)
If the condensing temperature exceeds a factory pre set value, red led and buzzer are
activated. The alarm code H4 is displayed in the alarm menu as indicated above. Possible
causes are:
- dirty condenser
COMMISSIONING
Having made the pre start up checks as described in section 4, connect to mains supply.
The display will be lit and OFF appears on the screen.
If the unit has a preheating cycle it is necessary to keep it in this condition for at least 3
hours.
If the unit has a voltage monitor, it is necessary to keep it in this condition for at least 7
minutes.
Set the required room temperature as described in para. 5.1 above
Turn unit ON using the ON/OFF key (9).
TROUBLESHOOTING
1) Compressor stops. There is an internal over temperature device which stops the
compressor each time the admissible temperature of the motor windings is exceeded.
Possible causes are:
- insufficient ventilation to unit
- mains voltage anomaly
- faulty condenser fan motor
The device resets itself automatically when the windings cool down.
2) Formation of ice on evaporator coil impeding regular air flow. Possible causes are:
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gram PRIMA-BOX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gram PRIMA-BOX in de taal/talen: Duits, Engels, Deens, Zweeds als bijlage per email.

De handleiding is 1,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info