335437
3
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
Instructions for use, mounting and connection
42
Basic adjustment of sensors to the
ambience
Upon each connection to the power supply the
sensors of the appliance are automatically adjusted to
the environment to ensure their proper function. All
displays indicate the sign "-".
Once the successful adjustment is completed it is
signaled with a beep, all displays are switched off and
your cooktop is ready for use.
During the adjustment procedure the sensors must be
free of any objects, otherwise the adjustment
procedure will be interrupted until such objects are
removed from the sensor surface. During this period
the regulation of the cooktop is impossible.
ATTENTION !
Before attempting any repairs on the appliance,
disconnect the power supply. In accordance with the
mains voltage the appliance should be connected in
line with the attached diagram. The earthing wire (PE)
must be connected to the terminal marked with the
earthing symbol
.
The connection cable must lead through the relief
safety device, protecting it from accidental pulling out.
Upon the completion of installation switch all the
hotplates on for about 3 minutes to check the proper
functioning.
Installation diagram
NOTE
In some connection boxes the connector bridges are placed between contacts 4 and 5, and in the others they are
stored at a designated place within the box. These boxes have the connection screws already in open position so
they need not be unscrewed. During the tightening procedure you will hear a faint “click”, meaning that the
tightening screw should be fastened tightly all the way
Connection may be carried out by means of:
rubber coated connection cables, model H05 RR-F 4x1,5 with yellow-green earthing cable;
PVC insulated connection cables, model H05 VV-F 4x1,5 with yellow-green earthing cable; or
any other suitable cables.
Mounting the built-in cooktop
Caution !
To avoid any possible hazard, the appliance may
be installed by qualified personnel only.
Panels and furniture lining of the kitchen cabinet
receiving the hob must be treated with
temperature resistant adhesives (100°C),
otherwise they might be discoloured or deformed
because of inadequate temperature resistance.
The cooking hob is intended for building into the
worktop above the kitchen element of 600 mm
width or more.
After the installation of built-in hob make sure that
there is free access to the two fixing elements in
front.
Suspended kitchen elements above the cooktop
must be installed at such distance to provide
enough room for comfortable working process.
The distance between the worktop and the hood
must be at least such as indicated in the
instructions for installation of the kitchen hood, but
in no case it may be less than 650 mm.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gorenje ect 680 al bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gorenje ect 680 al in de taal/talen: Engels als bijlage per email.

De handleiding is 1,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Gorenje ect 680 al

Gorenje ect 680 al Gebruiksaanwijzing - Deutsch - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info