334139
2
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
Instructions for use, mounting and connection
32
Important warnings
x The appliance may be built-in and connected to the
power supply only by a qualified technician.
x Particular areas of the cooktop surface (adjacent to
the hotplates) are hot during operation. Prevent the
children to hang around the appliance and warn them
properly against the danger of burns.
x Hot oil ignites readily, so be sure have the
preparation of such food (fries) under constant
control.
x Hotplates may not be left in operation empty, without
any dishes on top.
x Never use the appliance for heating the ambience.
x Never use the ceramic-glass cooktop as a working
surface. Sharp objects may damage the cooktop
surface.
x Preparation of food in aluminum or plastic cookware
is not allowed. Never place any plastic objects or
aluminum foil upon the cooktop surface.
x In case any other appliances are plugged in the
electric mains close to the cooktop, prevent the
contact of the plug cable with the hot cooking zones.
x Never keep any flammable or temperature sensitive
objects, like cleaning agents, sprays, detergents, etc.,
below the appliance.
x Never use cracked or broken ceramic-glass cooktop.
In case you notice any visible cracks on the surface,
cut the power supply immediately.
x In case of any malfunctions, disconnect the appliance
from the power supply and call service department.
x Do not use high-pressure steam cleaner or hot
steam to clean the appliance.
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead it
shall be handed over to the applicable collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed
of correctly, you will help prevent potential
negative consequences for the environment and
human health, which could otherwise be caused
by inappropriate waste handling of thisproduct.
For more detailed information about recycling of
this product, please contact your local city office,
your household waste disposal service or the shop
where you purchased the product.
Connection to the power supply
x Connections may be carried out by a qualified
technician only. The earthing protection must comply
with the standing regulations.
x Connection terminals are revealed when the
connection box cover is removed.
x Prior any attempted connection check that the
voltage indicated on the rating plate is in line with your
home power supply.
x The rating plate is located underneath the appliance.
x The appliance is manufactured for use with the
power supply voltage AC 230 V.
x The electric wiring should be equipped with a circuit
breaker able to isolate the appliance from the mains
in all points, with the distance between terminals of at
least 3 mm in open position. This may be done by
means of fuses, safety switches, etc.
x The connection should be selected in accordance
with the declared charge capacity of the mains and
the fuse power.
x Such appliances are allowed to be mounted on one
side next to a high kitchen cabinet, the height of
which may exceed that of the appliance. On the
opposite side however, only a kitchen cabinet of
equal height as the appliance is allowed.
x Upon the completion of installation, live wires and
isolated cables must be adequately protected against
accidental touching.
x Distance between the cooktop surface and the
cooking hood must be such as indicated in the
instructions for use of the hood.
x Kitchen cabinets may not be mounted underneath
the built-in ceramic-glass cooktop.
Basic adjustment of sensors to the
ambience
Upon each connection to the power supply the
sensors of the appliance are automatically
adjusted to the environment to ensure their
proper function. All displays indicate the sign "-".
Once the successful adjustment is completed it is
signaled with a beep, all displays are switched off
and your cooktop is ready for use. During the
adjustment procedure the sensors must be free
of any objects, otherwise the adjustment
procedure will be interrupted until such objects
are removed from the sensor surface. During this
period the regulation of the cooktop is impossible.
ATTENTION !
Before attempting any repairs on the appliance,
disconnect the power supply. In accordance with
the mains voltage the appliance should be
connected in line with the attached diagram. The
earthing wire (PE) must be connected to the
terminal marked with the earthing symbol
.
The connection cable must lead through the relief
safety device, protecting it from accidental pulling
out. Upon the completion of installation switch all
the hotplates on for about 3 minutes to check the
proper functioning.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gorenje ect 68 c hl bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gorenje ect 68 c hl in de taal/talen: Engels als bijlage per email.

De handleiding is 0,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info