335435
2
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
Instructions for use, mounting and connection
17
Connection to the power supply
Connections may be carried out by a qualified technician only.
The earthing protection must comply with the standing
regulations.
Connection terminals are revealed when the connection box
cover is removed.
Prior any attempted connection check that the voltage indicated
on the rating plate is in line with your home power supply.
The rating plate is located underneath the appliance.
The appliance is manufactured for use with the power supply
voltage AC 230 V.
The electric wiring should be equipped with a circuit breaker able
to isolate the appliance from the mains in all points, with the
distance between terminals of at least 3 mm in open position.
This may be done by means of fuses, safety switches, etc.
The connection should be selected in accordance with the
declared charge capacity of the mains and the fuse power.
Such appliances are allowed to be mounted on one side next to
a high kitchen cabinet, the height of which may exceed that of
the appliance. On the opposite side however, only a kitchen
cabinet of equal height as the appliance is allowed.
Upon the completion of installation, live wires and isolated cables
must be adequately protected against accidental touching.
Distance between the cooktop surface and the cooking hood
must be such as indicated in the instructions for use of the hood.
Kitchen cabinets may not be mounted underneath the built-in
ceramic-glass cooktop.
Basic adjustment of sensors to the ambience
Upon each connection to the power supply the sensors of the
appliance are automatically adjusted to the environment to
ensure their proper function. All displays indicate the sign "-".
Once the successful adjustment is completed it is signaled with
a beep, all displays are switched off and your cooktop is ready
for use.
During the adjustment procedure the sensors must be free of
any objects, otherwise the adjustment procedure will be
interrupted until such objects are removed from the sensor
surface. During this period the regulation of the cooktop is
impossible.
ATTENTION !
Before attempting any repairs on the appliance, disconnect the
power supply. In accordance with the mains voltage the
appliance should be connected in line with the attached
diagram. The earthing wire (PE) must be connected to the
terminal marked with the earthing symbol
.
The connection cable must lead through the relief safety
device, protecting it from accidental pulling out.
Upon the completion of installation switch all the hotplates on
for about 3 minutes to check the proper functioning.
Installation diagram
NOTE
In some connection boxes the connector bridges are placed between contacts 4 and 5, and in the others they are stored at a
designated place within the box. These boxes have the connection screws already in open position so they need not be unscrewed.
Connection may be carried out by means of:
rubber coated connection cables, model H05 RR-F 4x1,5 with yellow-green earthing cable;
PVC insulated connection cables, model H05 VV-F 4x1,5 with yellow-green earthing cable; or
any other suitable cables.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gorenje ect 600 e bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gorenje ect 600 e in de taal/talen: Engels als bijlage per email.

De handleiding is 1,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info