512899
6
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
129737
Instructions for Use 19
resistant laundry (5 programs), with
automatic moisture measuring
delicate laundry (4 programs) with
automatic moisture measuring
preset drying time for both resistant and
delicate laundry
The drying temperature is selected automatically
by the selection of the drying program, and it is
lower for delicate laundry than for the resistant
one. During the drying program with preset time
the temperature is the same for both the delicate
and resistant laundry.
Drying stage indicator
Damp for machine ironing
Damp for ironing
Mildly damp
Dry for storage
Very dry
Against crease
End
The drying stage indicator displays the actual
drying stage at any given moment. This is
signaled by the indicator light, illuminated
adjacent to a particular drying stage symbol. The
end of drying is signaled by the indicator light
END or ANTI-CREASE..
START button
Starts the operation of the appliance. In case of
program interruption (open door, voltage failure,
condensation receptacle full), it serves to
continue the actual program, after the cause for
interruption had been removed.
Drying
Drying time depends upon the selected program
and the quantity of laundry. If you selected time
defined drying the machine stops upon the expiry
of set time. If you selected any of the programs
for automatic determination of moisture, drying
time will largely depend upon the quantity of
laundry and the extent of moisture present in the
laundry (spin stage).
Actual stage of moisture during the program is
indicated by the moisture stage display, so you at
any time may remove particular pieces of clothes
you wish to remain damp. When you open the
door (add or remove pieces of laundry) the drying
program stops and the drum interior is
illuminated. When you close the door the light
goes off and the program continues by pressing
the START button.
In case of voltage failure during the program, the
drying operation stops. When the mains supply is
back you need to press the START button to
continue the program.
Each program is finished by a 10 minute cooling
down period, to prevent extracting of hot laundry
from the appliance and to improve the anti-crease
function.
Drying program is completed when the beep
sounds and the indicator lights END and ANTI-
CREASE are lit. This indicates that the laundry is
dried up to the point of preset moisture stage, or
the preset drying time had expired. The drum
stops and laundry may be removed from the
machine.
In case laundry was not removed after the
completion, and the machine was not switched
off, it automatically starts a special anti crease
program. This program occasionally turns the
drum in either direction to prevent the laundry to
drop and settle to the bottom and get creased.
The program stops automatically after one hour,
but it may be interrupted at any moment by
opening the door or turning the appliance off.
Signal lamp – condensation vessel
(only with condensation type dryer)
The lamp is lit when the vessel is full, and it stops
the drying program. Once the receptacle is
emptied and reinserted, the drying program may
be continued by pressing the START button.
After drying - condensation type dryer
x Open the dryer door.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gorenje WT911 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gorenje WT911 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info