FREQUENCY SETUP
Next step is to adjust your machines frequency if the detector is
picking up any electronic magnetic interference (EMI).
In order to do this you can either change the offset of frequency on the
detector or reduce the sensitivity so follow the next steps.
Hold your Golden Mask 5 up so the coil is at waist height.
Press FREQUENCY button and that brings up the frequency option
menu.
Then select either 8 or 18 Hz by using the - and + touch pads then
select I or II what are a frequency shifts and then press ENTER.
Now if 8 or 18 Hz are still noisy then reduce the sensitivity by pressing
the POWER LEVEL button and reduce the sensitivity till the EMI fades
away from the audio.
A steady running metal detector is more effective than an erratic one.
After every frequency change press the ENTER button!! And re-ground
balance for optimal performance levels in order to make the detector
see through the soil to the best of its ability’s.
So let’s move on to Ground Balancing
You have two options here and that is manual ground balance or
automatic ground balance either way Golden Mask has made ground
balancing easy for you to do.