656038
4
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
2. Focus the subject.
• Press the shutter button
halfway to focus.
• The shutter speed and
aperture will be displayed in
the viewfinder.
• Check that the < > icon is
lit in the viewfinder.
60 5.0
TTL
0.5 0.7
1
1.5
2
3
4
6 9
13
18
1.7
2.3
4
5
7
10 15 20
30
40 60
m
ft
Zoom
mm F
35
56
3. Take the picture.
• Check that the subject is
within the effective range
displayed on the LCD panel.
• Right before the shot is
taken, a preflash is fired, and
then the main flash is fired.
• <TTL> will be displayed on the LCD panel even if the camera is
compatible with i-TTL.
Using i-TTL Autoflash in the Shooting Modes
Just set the camera’s shooting mode to <A> (aperture-priority AE),
<S> (shutter-priority AE), or <M> (manual) and you can use i-TTL
autoflash.
Select this mode when you want to set the shutter speed
manually.
The camera will then automatically set the aperture
matching the shutter speed to obtain a standard exposure.
• If the aperture display blinks, it means that the
background exposure will be underexposed or
overexposed. Adjust the shutter speed until the aperture
display stops blinking.
Select this mode when you want to set the aperture
manually.
The camera will then automatically set the shutter speed
matching the aperture to obtain a standard exposure.
If the background is dark like a night scene, a slow sync
speed will be used to obtain a standard exposure of both
the main subject and background.
Standard exposure of the main subject is obtained with
the flash, while a standard exposure of the background is
obtained with a slow shutter speed.
• Since a slow shutter speed will be used for low-light
scenes, using a tripod is recommended.
• If the shutter speed displays blinks, it means that the
background exposure will be underexposed or
overexposed. Adjust the aperture until the shutter speed
display stops blinking.
Select this mode if you want to set both the shutter speed
and aperture manually.
Standard exposure of the main subject is obtained with
the flash. The exposure of the background is obtained
with the shutter speed and aperture combination you set.
S
A
M
Flash Sync Speeds and Apertures Used
P
S
A
M
Aperture Setting
Automatic
Automatic
Manual
Manual
Shutter Speed Setting
Set automatically (1/60s-1/Xs)
Set manually (30s-1/Xs)
Set automatically (30s-1/Xs)
Set manually (buLb,30s-1/Xs)
1/X sec is the camera's maximum flash sync speed.
FV Lock: Flash Value Lock
FV (flash value) lock locks the correct flash exposure setting for
any part of the scene.
With <TTL> displayed on the LCD panel, you press the camera’s
<FV> button.
FEC: Flash Exposure Compensation ----------------------------06
FV Lock: Flash Value Lock -------------------------------------06
High-speed Sync---------------------------------------------07
Bounce Flash---------------------------------------------------07
ZOOM: Setting the Flash Coverage and Using the Wide Panel--------08
M: Manual Flash-------------------------------------------------09
MULTI: Stroboscopic Flash--------------------------------------10
Second-Curtain Sync---------------------------------------11
S1/S2 Slave Triggering Mode------------------------------------11
C.Fn: Setting Custom Functions---------------------------------12
Protection Function--------------------------------------------13
Using Flash
05
06
TTL
0.5 0.7
1
1.5
2
3
4
6 9
13
18
1.7
2.3
4
5
7
10 15 20
30
40 60
m
ft
Zoom
mm F
35
56
1. Set the Camera Flash to
i-TTL auto flash mode.
Press the <MODE> button
so that <TTL> is displayed.
FECFlash Exposure Compensation
With FEC function, this flash can adjust from -3 to +3 in 1/3rd
stops. It is useful in situations where minor adjusting of the TTL
system is needed based on the environment.
Setting FEC:
1. Press < SET > button. The
flash exposure compensation
amount will blink on the LCD
panel.
2. Set the flash exposure
compensation amount.
• Press the < - > or < + >
button to set the amount.
• To cancel the flash exposure
compensation, set the
amount to “+0.0”. The
amount is not displayed on
the LCD panel.
The flash exposure compensation amount can only be set in
TTL mode.
If the camera has also set the flash exposure compensation
amount, the final flash amount is determined by the common
effects of the two amounts.
3. Press < SET > button again to confirm the setting. The flash
exposure compensation amount stops blinking.
TTL
0.5 0.7
1
1.5
2
3
4
6 9
13
18
1.7
2.3
4
5
7
10 15 20
30
40 60
m
ft
Zoom
mm
88+
F
56
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Godox TT680 N bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Godox TT680 N in de taal/talen: Engels als bijlage per email.

De handleiding is 1,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info