656066
5
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
Slave Trigger Model
This model offers three choices which can be set by the optical control and
anti-preflash switch (5).
1. No optical control: the slave trigger indicator (10) is off, meaning that the
slavetrigger model is shut down.
2. One fire model: the slave trigger indicator (10) glows blue, meaning the flash
will fire synchronously on one external flash. This model can act as an auxiliary
lamp, varying the light effects.
3. Anti-preflash model: the slave trigger indicator (10) glows red, meaning the
flash will fire synchronously on the second flash. This model can act as an
auxiliary lamp, applicable to TTL system. And with anti-preflash function, it can
work for the cameras equipped with one fire anti-preflash system.
Modeling Lamp
Modeling lamp switch (6) decides whether the modeling lamp is on or off: modeling lamp
indicator (11) on, modeling lamp is turned on;
the indicator (11) off, modeling lamp is turned off.
The lamp can also turn off automatically for auto-self protection after lighting for 30 minutes.
Brightness of the lamp can be adjusted by Flash Output Controller (4).
Buzz Function
Buzz function can be set by the buzz button (7) and it is turned on when the
buzz indicator (12) is on; it is shut off when the buzz indicator (12) is off. A “BI”
sound will be heard whenit is fully charged and ready to fire.
Model
Flash Output
Guide Number (m ISO 100)
Color Temperature
Power Voltage
Flash Power Control
Modeling Lamp
Recharging Time
Flash Triggering Method
Flash Duration
Fuse
Dimension
Weight
120SDI 160SDI 250SDI 300SDI
120WS 160WS 250WS 300WS
38 43 48 58
5600±200K
220V/50Hz or 100V~120V/60Hz
8 steps
75W
0.5~2sec
Sync cord, Test button, Slave
1/2000-1/800s
5A
230*200*108MM
Approx.1.16KG
Shut down the device immediately when it works abnormally and find out the
reason.
Do not keep long time in using the modeling lamp. It's better to be
cooled down for one minute after five minutes continuous use.
Technical Data
Maintenance
07 08
Avoid sudden impacts and the lamp should be dedusted usually.
It's normal for lamp being warm when in use. Avoid continuous flashes when it
is not necessary.
Except that users can replace the plug-in tube and modeling lamp by themselves,
maintenance of all the flashes is up to our authorized maintenance department
which can provide original accessories.
One year warranty period will be canceled when any unauthorized maintenance is
found.
Disconnect the power when doing maintenance work or cleaning.
New changes made to the specification may not be updated in this manual.
If the product had failures or is wetted, it can be continuously used only after it
is repaired by professionals.
Tube Replacement
Turn down the power before replacing the flash tube and wear insulated gloves.
Then, loosen the iron wire on the tube, keep a balanced hold on the two feet of the
flash tube and pull out the old tube gently. Take down the feet casing to put it on
the new one. Hold two feet of the new tube, and target directly towards the two
copper outlets, then push them slightly in. Tighten the iron wire to fix the flash tube.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Godox-Smart-250SDi

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Godox Smart 250SDi bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Godox Smart 250SDi in de taal/talen: Engels als bijlage per email.

De handleiding is 2,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info