656045
9
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
Memory Function
The device is equipped with memory function for the panel setting. It will help remember the panel setting 3 second
after you set it. When starting up the flash next time, the panel setting will be the same as the status before
powering it off.
Tube Replacement
Shut down the power and remove the power cord before replacing the flash tube and wear insulated gloves. Then,
loosen the iron wire on the tube, keep a balanced hold on the two feet of the flash tube and pull out the old tube
gently. Take down the feet casing from the old tube and put it on the new one. Hold two feet of the new tube, and
target directly towards the two copper outlets, then push them slightly in. Twine the iron wire on the stainless steel
sheet to fix the flash tube.
- 29 - - 30 -
Other Applications
Wireless Control Function
The flash unit is built in with a Wireless Control Port so that you can wirelessly adjust the power level
of the flash and the flash triggering.
To control the flash wirelessly, you need a FT-16 remote control set (on-camera and on-flash). Insert
its receive end into the Wireless Control Port on the flash and insert the transmit end into the camera
hot shoe. Settings made on the hotshoe-mounted transmit and receive ends will be
wirelessly communicated to the flash. Then you can press the camera shutter
release button to trigger the flash. You can also hold the transmit end at
hand to control your off-camera flash.
For full instructions on the use of FT series remote control, see its
user manual.
Sync Triggering
The Sync Cord Jack is a Φ3.5mm plug. Insert a trigger plug here and the flash will be fired synchronously with the
camera shutter.
Shut down the device immediately when it works abnormally and find out the reason.
Avoid sudden impacts and the lamp should be dedusted usually.
It’s normal for lamp being warm when in use. Avoid continuous flashes when it is not necessary.
Maintenance of all the flashes is up to our authorized maintenance department which can provide original accessories. Users can
replace the flash tube and modeling lamp provided by the manufacturer.
One year warranty period will be cancelled when any unauthorized maintenance is found.
If the product had failures or was wetted, it can be continuously used only after it is repaired by professionals.
Disconnect the power when doing maintenance work or cleaning.
New changes made to the specifications or designs may not be updated in this manual.
Maintenance
Technical Data
Model Quicker600IIM Quicker400IIM
Flash Mode M/Multi/Hss(high-speed sync)
Guide Number in 1/1 full power
(
m ISO 100, using standard reector)
76 65
Flash Duration
(t0.1)
High-Speed Flash (speed) Mode 1/316s
1/28984s 1/416s
1/35086s
Stable Color Temperature Mode 1/316s
1/4246s 1/416s
1/4983s
Color
Temperature
Stable Color Temperature Mode 5600±200K 5600±200K
High-Speed Flash (speed) Mode 5400K~9000K 5400K~9000K
High-Speed Sync Flash (speed) Mode 4600K~5000K 4600K~5000K
POWER 600WS 400WS
Recycle Time Approx. 0.05-0.9s Approx. 0.05-0.7s
Output Level
M 1/128~1/1
Hss 1/16~1/1
Multi 1/128~1/8
Multi Flash Yes
(
max. ash time: 99; max. ash frequency: 30)
Sync Mode
High-speed sync (up to 1/8000s)
,
rst curtain sync
,
second curtain
sync
Delay Flash 0.01~30s
MASK Function
Fan
Beeper
Modeling lamp 150W
Slave Trigger Model S1/S2
Display Flash Duration
Display High qualied LCD panel
Radio (2.4G) Transmission (X system)
Wireless Function Slave unit
,
ON/OFF
Controllable Slave Units 16 groups
:
0~9
A,B,C,D,E,F
Transmission Range (approx.) 50m
Channel 32
:
1~32
Sync Triggering Mode 3.5mm sync line, PC sync socket
wireless control port
Dimension
Flash diameterΦ14CM, height of ash with handle 23CM,
length o f ash with lamp cover 41CM
Net Weight Approx. 2.96Kg
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Godox Quicker 400 IIM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Godox Quicker 400 IIM in de taal/talen: Engels als bijlage per email.

De handleiding is 5,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info